phone rings but can't get to answer
you need to plug it out
If your headset does not turn on and it's wireless, than you should check your batteries. If your headset doesn't turn on and it's wired, than you may have faulty wiring, or a misaligned head-jack. And if that isn't the case. You probably have faulty internals.
The Plantronics Voyager 855 bluetooth pairing passkey is 0000. The pairing procedure is as follows: 1. Turn ON the bluetooth feature on your phone. 2. Turn the headset off by pressing and holding the call control button until the indicator turns red and then turns off. 3. Turn the headset back on by pressing and holding the call control button until the indicator flashes red/blue. The headset remains in pairing mode for 3 minutes. 4. Use the commands on your phone to locate the headset. 5. When prompted for the passkey, enter 0000. When pairing is successful, the indicator on your headset turns off. Your headset is now connected and ready to use.
buy a headset and turn it on
The headset is a set of bearings that allows the fork to turn smoothly in the head tube of the frame w/o sticking wobbling around when you turn the handle bars.
To reset the Motorola H710 Bluetooth headset, simply turn the headset off. Then, hold the on button down for about 10 seconds until the blue light quits blinking. The headset is now ready to be paired with any Bluetooth capable device.
Here are some possible causes for your problem: The headset is not turned on, or the headset is not connected to a mobile phone (follow the pairing instructions to re-pair headset). Press the call control button for 2 seconds until you hear a beep or see the indicator light glow blue to turn headset on. Your headset may be out of range. Move the headset closer to the phone or Bluetooth device. Your headset battery is drained. Charge your battery using the AC power adapter supplied. The listening volume is too low. Press the volume key up (toward the earloop) to increase the sound heard in the headset.
hit s.source on remote turn on personel
When you are planning to pair these up please make sure that you have charged up your bluetooth and your cell phone. Follow the instructions that I have put below in related links. If that does not work, if your headset does not charge or flash red/blue when you turn it on you may need to replace your headset
Ok,first plug your headset into your D.S.,then turn it on,go to wifi and there!Send me your wifi code and we shall battle
Turn up the headset volume
plug it in to the sistim and take it off and turn it on