how can I remove adrum brake from geo metro 1992
Most auto parts stores have wiring diagrams for a 97 Geo Metro. This includes wiring diagrams for the brake light, head lights, and much more.
the bolt patter for my 1992 geo metro on a 12" wheel is a 4x100
it should be able to
yes, if it's a 3 cylinder Mr Geo Metro yes, if it's a 3 cylinder Mr Geo Metro
Yes, the 1992 Geo Metro does have one air bag. There is only an airbag for the driver and not the passenger side.
You can get a fuse diagram for a 1992 Geo Metro in the car's owner's manual. You can also check with different auto stores.
What kind of wiring diagram are you looking for? Engine, radio, lights etc.
NO! Geo Storms have a 4X100mm bolt pattern, a Geo Metro has 4X114.3mm bolt pattern.
The hood release on a 1992 Geo Metro is usually in the glove box. It is in the top left side inside the glove box.Ê
sue in da house
Depends on what the problem is. It is either, defective bulbs, brake light switch, blown fuse, or wiring problem. Check the fuse first, then if all lights including the 3rd light are not working, suspect a defective or out of adjustment brake light switch. The switch is located somewhere on the brake pedal arm, or may be a pressure switch on the master cylinder.
low brake fluid
Check that your hand brake is all the way down. If your hand brake switch is tripped, the brake lihgt should come on, and the automatic running lights won't.
Yes you can. All Geo Metro engines are compatible from 1989 - 1997. Just make sure that they both have the same transmission or you'll have to do a lengthy and expensive conversion.
Can you swap a 93 Geo metro manual transmition with a 95 Geo Metro
I pull the hand brake 1 teeth which hopefully has no effect on engaging the worn brakes on rear drums of the car. Of course brake lights turns on on the dash panel. Hope that someone comes up with better answer.
to Recirculate Exhaust Gases
Back up system fuse burned out and the tranmission has a lock out for park. Try changing the fuse and looking for a short in the brake lights or turn signals.
Brake fluid does collect moisture. If you've never changed the brake fluid in your system, it probably has moisture in it and yes, it can rust the lines from the inside out.
Should be a reservoir on the firewall driver's side
put your foot on the brake.... if that doesn't work you have to fix the wiring for the brake/transmission interlock
my book says 5 degrees BTDC
yes if you modify the engine brackets