0
Brakes make sound on hard stop and abs and brake light comes on?
Wiki User
∙ 15y ago
Need brake job. Pads badly worn.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What causes the brake pedal to shudder and you hear a popping or grind sound from the brakes of a 2003 Rendezvous and the AWD disabled light comes on occassionally?
Mine did that I replaced the abs sensor.
If the brake light stays on and there is a squeaky sound coming from the back of your car?
I hope you take it to a garage and have the brakes inspected. Might be a brake fluid leak.
How do you tell if your brake pads are bad?
If you are driving and you hear a high pitch squeeling/screaching sound but when you apply the brakes the sound stops your brakes need replacing, this is called your brake squeeler.
How you turn your brake light off in a 1996 oldmobile?
Your Brake light is a warning light, it means something is wrong with your brakes, first you should check your pads for wear (if you feel a grinding sound every time you press the brakes they are shot), sometimes brake pads have wear indicators (a wire that when the pad wears surfaces closing a circuit and turning the light on), another possibility is low brake fluid level. Another yet is that one of the circuits has failed (there are two), If all these checks do not give you an answer, take it to a specialized brake shop, you don´t want to suffer the failure of your brakes when least expected, NEVER save mone on brakes, they are the most important system in your car.
Squealing sound when brake is applied?
The squealing sound in brakes is caused by dust and dirt in the brakes. Also, more commonly, it is caused by worn pads or shoes. On disk brakes there is a wear indicator. This will rub against the disk and squeel when brake pads are worn to where they need replacing.
How do you connect the horn to the brake pedal so when the driver brakes the horn will sound?
IT WOULD BE SIMPLE TO COONNECT YOUR HORN TO THE STOP LIGHT CIRCUIT IF ARE PREPARED TO PAY FINES AND HAVE YOUR DECLARED UNROADWORTHY
Why does ABS sign comes on 1998 Ford Windstar?
A problem has been detected with your Antilock Brake System It could be a fuse , a sensor , or some other problem As long as the red " BRAKE " light in your dash is not on , you still have " normal " brakes ( in my case , the ABS light suddenly stayed on and I found that a fuse wasn't installed all the way , when I pushed the top of the fuse I heard a " click sound " and the ABS light went out , just lucky I guess )
Why does it sound like air is coming out of your brakes?
brake booster could be bad the seal around the rod that hooks to the brake pedal is leaking
Why does it sound like air is seeping out when I press my brake pedal on my 1997 Chevy Tahoe.?
The power brakes on most vehicles operate on the engine vacuum. If there is a leak or problems with the power brakes it can make a hissing sound. But then, sometimes power brakes do that when they're working properly. It could be from either a hole in the diaphragm of the brake booster or normal operation. If the sound is new, and was not there before, and your brake pedal is going to the floor, then you should have the power booster replaced.
What does it mean when your brakes make grinding noise when you stop?
The brake pads are worn out and need to be replaced. The grinding sound means your brakes are about to stop working.
Does the abs light come on when your breaks need changing?
No, the ABS light will come on when there is a problem with the anti-lock braking system. Have this looked into by a professional. You will know your brake pads need changing when you hear a squealing sound when you apply the brakes.
Could you tell me if my brake servo needs changing if there's brake fluid in it and my brakes keep sticking on?
Hi. If the brakes are sticking on it won't be the servo thats at fault it's sound more like the calipers need cleaning.
