If you are asking about the Remington Air Master 77. Then see the attached Web Page. It was made by Crosman Air gun. New in 2006
See the Link Below
Your question is not clear. What are you converting from. Air guns are already .177 unless you have a larger barrel on them. In that case you just change the barrel to .177. If you are converting for "AIRSOFT" then it can not be done successfully.
No. a 177 is a 4.5mm pellet. A 5mm is a 20 cal pellet. A 5.5mm is a 22 cal pellet Don't try it in the wrong airgun.
See the Link Below and locate the owners manual for your airgun.
Crosman still makes replacement parts for this airgun. See the link below
If you are referring to the Crosman 1377 air rifle it can still be repaired by Crosman airgun. Contact Customer service at www.crosman.com.
Yeah eventually from lead poisioning! Not a good idea. Coyotes are to big for an air rifle.
.177 inches is equivalent to approximately 4.5 millimeters. To visualize this thickness, it's roughly similar to the diameter of a standard BB pellet or the thickness of a typical pencil lead. This measurement is often used in airgun ammunition, including pellets.
Your best bet is to go on-line and do a search for "Airgun repair" and locate a shop near you for repairs.
You will have to experiment by shooting as many different types as you can find/afford. Weapons exhibit preferences for certain weights/brands.
This all depends on your needs. FXAIRGUNS makes 10 different models in both .177 and .22 caliber. The .177 will be faster but the .22 will have more knockdown power. So it's really up to you, your needs and the cost. Remember, there is an additional cost of the hand pump or C02 tank.
You can break down this equation to make it easier.9+8= 177+6=1317+13= 30Thus, the answer is 30.
No more that 10 pumps! Per the Instructions.