go to the parts store and buy several cans of octane boost how many gallons by mistake ????
mass air flow sensor clean it with Qd electronic cleaner worked for me had he same problem with a 93 cutlassciera. runs great now
To change the water pump in a 1993 Cutlass Ciera, first disconnect the battery and drain the coolant. Remove the serpentine belt and any components obstructing access to the water pump, such as the fan or pulley. Unbolt the water pump from the engine block, clean the gasket surfaces, and install the new pump with a new gasket. Reassemble all components, refill the coolant, and reconnect the battery.
There is no transmission drain plug. You have to drop the entire pan to change the fluid. Always change the filter while you have the pan off and clean any metal shavings from the pan.
To install a water pump on a 1986 Oldsmobile Cutlass Ciera, first, disconnect the battery and drain the coolant. Remove the serpentine belt, then detach any components that obstruct access to the water pump, such as the alternator or power steering pump. Unscrew the old water pump from the engine block, clean the mounting surface, and install the new pump with a fresh gasket. Finally, reassemble everything, refill the coolant, and reconnect the battery.
To replace the thermostat in a 1994 Cutlass Ciera with a 6-cylinder engine, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then locate the thermostat housing, which is usually near the engine block. Remove the bolts securing the housing, take out the old thermostat, clean the mating surfaces, and install the new thermostat along with a new gasket. Reassemble the housing, refill the coolant, and reconnect the battery before starting the engine to check for leaks.
To change the water pump on a 1990 Oldsmobile Cutlass Ciera, first ensure the engine is cool and disconnect the battery. Remove the serpentine belt and drain the coolant from the radiator. Unbolt the water pump from the engine block, clean the mating surfaces, and install a new gasket with the new pump. Reassemble everything by reversing the steps, refill the coolant, and reconnect the battery.
A clean driving record would be a record that is free from accidents, moving violations, tickets in general, and one that has no points.
I'd suspect a vacuum leak or a problem with the EGR valve, but if I were working on it I wouldn't replace anything until I've had a chance to check into it further. Clean the air intake mass air flow sensor with carb cleaner. . How can you crank it "in gear"??? You got sensor problems.
Come clean. Admit, ask for forgiveness.
The project was renamed, restructured, and began their work again with a clean slate.
jb
A clean driving record in Canada refers to a driver's history that shows no traffic violations, accidents, or points against their license. This typically means the individual has not been convicted of any serious offenses, such as impaired driving or reckless driving, and has maintained a safe driving history over a specified period. A clean record can positively impact insurance rates and eligibility for certain driving-related opportunities. Each province may have its own criteria for what constitutes a clean driving record.