Ther are two types of VoIP, one that requires VoIP modem and one that is through web user interface account. It doesn't matter whether it is a cable modem or an ADSL modem.so sexy.
To connect a VoIP phone service to a wireless modem, first, ensure your modem has an Ethernet port. Use an Ethernet cable to connect the VoIP adapter or phone directly to the modem. If using a VoIP adapter, follow the setup instructions provided by your service provider to configure the device. Finally, ensure your internet connection is stable for optimal call quality.
You can connect your laptop to the Internet with a cable modem, sure. You will need an Ethernet cable to do that. If you want wireless internet, you will need a cable modem, and a wireless router as well.
To access the internet via broadband cable, you will need a cable modem. Bandwidth is used for transmitting the signals of the internet to and from your home, and the cable modem is in place to allow the signals to be sent and received.
You would need a cable modem when you want to connect to a cable internet service.
cable modem
Ethernet cable
For cable modem networking to work the cable modem will need to be connected to a network hub. This will allow all computers in the network to connect to the internet.
Voice Over Internet Protocol is phone service that uses the Internet as opposed to conventional phone lines. You need an Internet connection, a phone and a modem from the VOIP provider.
VoIP ready means a particular device is readily available to use for VoIP (Voice over Internet) applications. This can be a phone, computer, or modem. Typically VoIP ready phones and modems are sold.
Use the modem recommended by your cable company.
Yes, you can own your own cable modem, but most television and internet providers allow you to use a cable modem for free if you sign up for their service.
Your question presupposes that you have subscribed to cable internet service, and that the provider has run a cable to your home. It also presupposes that you have a cable modem. If these suppositions are correct, you just have to run coax between the cable jack on the wall and the cable modem. Then you need to connect the modem to your computer via USB, FireWire, or whatever interface your modem and computer have in common. FriPilot