0
What else can I help you with?
What car uses a 5 x 5.5 bolt pattern?
There are a lot, assorted suv's dodge trucks/suvs Suzuki suv's Kia suv's other concerns are the stud size and the hub center bore size and offset. roadkillcustoms.com has a chart that will give you the yr/make/model/stud dia./ hub and offset.
Ford stud pattern?
Model and year would help.
What should stud spacing be in a shed?
it depends on the size of the shed
What is the biggest stud earrings?
You could probably find stud earrings of any size, and reach a maximum when the stud could no longer hold the stone in the ear without tearing the hole open.
What size spacers needed to fit ba 17in rims to el falcon 94 model?
32MM THICK 5 STUD BOLT ON ALLOY WHEEL SPACERS SUIT .. they are illegal to have though
What is the wheel stud size on a 1970 Chevelle?
7/16-20
How do you change from a pressed in rocker arm stud to a threaded one?
you have to remove the pressed in studs ,and tap the hole with the proper thread size for the threaded stud. this may require drilling the heads with the proper size drill, for the tap size you need. you must make sure that the new threaded studs are bigger than the pressed in ones, or you won't be able to thread the stud holes.
What size are the bolt holes on the rotor on a 2008 Subaru Outback?
Not sure about the hole but the stud size is M12 X 1.25
What is the ray ban model with the metal stud on the side?
There are multiple models with the stud. The Ray-Ban original wayfarer is the thick black round half circle with the 2 studs.
How can I effectively drill into a stud to securely hang heavy objects on my wall?
To effectively drill into a stud to securely hang heavy objects on your wall, use a stud finder to locate the stud, mark the spot, choose the right drill bit size, drill into the stud at a slight angle, and then insert a sturdy screw or anchor to hang your object securely.
What is the size of Chevy 305 cid SBC exhaust manifold stud nut?
The exhaust manifold stud nut for a Chevy 305 cubic inch small-block engine typically uses a 3/8-inch thread size. The nuts are usually 3/8-16, meaning they have a coarse thread pitch. The standard hex size for these nuts is generally 9/16 inch. Always verify the specific application, as variations can occur based on the year and model.
What size wheels are fitted to a sprinter van and what is the stud pattern?
Sprinter vans typically come with wheel sizes ranging from 16 to 19 inches in diameter, depending on the model and configuration. The standard stud pattern for most Sprinter vans is 5 bolts with a 130 mm pitch circle diameter (PCD). It's important to verify the specific requirements for your particular model, as variations may exist based on the year and type of van.
