Calcium is carried in water by a process known as?

solution. the particles are light so they flow with the water. Heavy particles just sink down to the bottom.

the answer is B. solution

Reducing calcium and magnesium in the water is known as water softening. A water softener uses a carbon filtration system.

user-generated content: http://wiki.answers.com/about/disclaimer.html report abuse = Which water contains soluble salts of calcium and magnesium is known as =

Calcium Hydroxide is the product when Calcium Oxide is reacted with water. It is an exothermic reaction liberating heat. This process is called slaking. CaO + H2O -----> Ca(OH)2.

The scientific name for such a process is EROSION

It is the process of erosion, carried out by the agents of wind, water, ice, and gravity.

ADD WATER. The process is called SLAKING. Add water to calcium oxide - sometimes called quicklime, and the result is calcium hydroxide, sometimes called slaked lime. CaO + H2O = Ca(OH)2

Both the components in the mixture are insoluble in water. However, calcium carbonate reacts with hydrochloric acid to form calcium chloride (which is soluble in water) whereas the sand remains unchanged. Sand can now be separated by filtration. Calcium carbonate is recovered back by treating the filtrate (calcium chloride) with sodium carbonate. After filtration is again carried out, what you have on the filter paper is calcium carbonate.

Both the components in the mixture are insoluble in water. However, calcium carbonate reacts with hydrochloric acid to form calcium chloride (which is soluble in water) whereas the sand remains unchanged. Sand can now be separated by filtration. Calcium carbonate is recovered back by treating the filtrate (calcium chloride) with sodium carbonate. After filtration is again carried out, what you have on the filter paper is calcium carbonate.

Physical, you can reverse the process by evaporating or boiling the water

The answer is leaching.

Stalactites are found on the ceiling of caves and are made by the dripping of water enriched with calcium, from the cracks in the ceiling. when the calcium precipitates from the water it leaves calcium and the water drops down to start the formation of stalagmites that are created in the same process but are created by the water dripping off of stalactites. :) hope this helped

Precipitation is part of the process called the water cycle.

In the water cycle this process is known as "Precipitation".

Calcium hydroxide or slaked lime is sometimes added to form a fluffy charged solid that aids in the removal of smaller particles from water. This is used mainly in sewage water preparation.

None. Limewater is a solution of Calcium hydrate in water, also known as slaked lime. The more quicklime (calcium oxide) that is slaked, the more white and the more caustic it becomes. Calcium carbonate (limestone) and high heat (in a kiln) = Calcium oxide and CO2 Calcium oxide (quicklime) and water = calcium hydrate (slaked lime) slaked lime and water = lime water

Water vapor turning into water is a gas changing into a liquid. This process is known as condensation.

De-ionised water is normally known as demineralised water. It?æis water whose mineral ions such as calcium, sodium and iron has been removed.

No. Quicklime is calcium oxide a compound with the formula CaO. Lime water is calcium hydroxide or Ca(OH)2 dissolved in water, producing a very basic solution. Lime, will form lime water if it is dissolved in water though. Dry calcium hydroxide is known as slaked lime.

Ca(OH)2 is a colorless crystal or white powder. It is prepared by reacting calcium oxide (lime) with water,a process called slaking. It is a strong base and is used as a suspension in water (milk of lime);

The process by which fresh water is generated is known as distillation process. Sea water is converted into fresh water by evaporating and condensing the sea water.

The process by which ice changes to liquid water is known as melting.

Rocks particles carried by flowing water settle froming a new landform.

condensation

Calcium deposits in swimming pools is also known as scale. The reason that calcium deposits appear is because the pool water is out of balance. The PH not being an acceptable level is a common cause of calcium buildup.

The process is known as the water cycle, and the water becoming vapour to form clouds is due to evaporation.

The compound of CaF2 is known as Calcium fluoride. Each molecule contains one calcium atom and 2 fluorine atoms. It is soluble in water.

For a carbide lamp to work, there is two chemical reactions that have to take place. The first chemical reactions occurs from calcium carbide and water. The second, is between calcium oxide and water. The reactions produce a very bright but gentle flame. The amount of water that combines with the calcium carbide and calcium oxide to produce this flame, is initially set by the operator of the lamp.

The process of the water cycle is simply called "The water cycle". You already had the answer :3 It is also known as the hydrologic cycle.

Carbonated water (also known as club soda, soda water, sparkling water, seltzer water, or fizzy water) is water into which carbon dioxide gas under pressure has been dissolved. ... This process, known as carbonation, is a process that causes the water to become effervescent.

They eventually settle out of the water in a process called deposition. yup and that is the full truth you rock person that first made this :)

This process is carried out through Distillation phenomenon

Erosion. It can be wind, water or chemical.

Osmosis is the passive transport of water, nothing else. Any other substances, such as calcium, are passively transported through the process of diffusion.

Some of the process that fix carbon dioxide are limewater + carbon dioxide equals calcium carbonate + water. Another is calcium carbonate + water + carbon dioxide = aqueous calcium bicarbonate. These equations work in reverse to release carbon dioxide.

From a thermodynamics standpoint, it depends how the process is carried out. If the system (the water) and the surroundings remain close to equilibrium during the entire process then the water boils reversibly. So if the change in temperature is approximately zero throughout the process and the process takes an infinitely long amount of time to carry out you can reversibly boil water. If you were asking whether water vapor can turn back into liquid…

Mix 1/2 cup of ammonia with 1 gallon of water in a bucket. Use a stiff bristled brush to scrub the calcium deposits with the ammonia water solution. Let the solution remain on the calcium deposits for 10 minutes, then rinse with clean water that does not contain ammonia. Repeat the process if necessary.

Sun rays hit water and it evaporates into air where it is carried up into the atmosphere. As the warm water vapor rises through the air a cooling process begins that forms clouds. The clouds dump the water back into ponds, lakes, and streams and the process continues.

By itself, no. However, if mixed with water, it can form an explosive gas known as acetylene.

Low calcium hardness is increased by adding calcium chloride. The amount needed may be worked out using the calcium chloride calculator.on the link below divide the correct amount of calcium chloride into 3. Add the first part and circulate the water for at least 4 hours. Test the water again and repeat the process until the desired level is reached.

there is a process called ion exchange in which sodium ions replace the calcium and magnesium ions.

A compound is not endo/exothermic; dissolving these salts in water is an exothermic process.

No elements but mineral compounds. Calcium carbonate and calcium sulphate are soluble in water acidified by atmostpheric carbon-dioxide; and humic acids. Others such as felspar are broken down by the related process, hydrolysis.

In the process of cooking bones, the calcium deposits within the marrow are evaporated with the water/moisture of the bone. This lack of calcium is why the bone is more brittle after having been cooked.

Photosynthesis is the process. Plants use carbon dioxide in the air, as well as water and sunlight to make glucose and oxygen. The equation is Carbon Dioxide + Water => Glucose + Oxygen

water is broken is to O2. The process is known as photolysis

Yes, through a process known as desalination

Water gets into the air by a process known as evaporation.

The rebuilding of ADP into ATP with a new source of energy is carried out by a process called dehydration synthesis. Dehydration synthesis involves the joining of two compounds in association with the loss of a water molecule between them.