If the grout is dirty there is a chance that the new grout will not stick over it. If you clean it out first the likelihood of it working increases, as well as looking better in the long run.
Tile is an insulator. If the tile is placed correctly over an existing wood floor and is sealed with grout, it will insulate the room it is in.
No, the grout allows for tile expansion and contractions, without it your tile could crack but there are some tile that can be installed with minimal (1/16inch) grout lines.
form_title= Tile Grout form_header= Give your home a face lift with new tile grout! Do you want to install new grout?*= () Yes () No () Not Sure Do you want to clean out old grout?*= () Yes () No () Not Sure What color do you want the grout?*= _ [50] How old is the grout in your home? *= _ [50]
With grout
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
The sealant goes on the grout not on the tile & yes it is a great idea & do it quickly before the grout starts to get stained by use.
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
You risk having the loose tile cause the grout to chip out. Find a way to secure the tile first.
== == Water can very well find it's way through the floor. It is usually at areas where the tile meets a vertical area at a shower or tub. Movement can occur in these areas. It is best to caulk joints such as these, instead of grout. The caulking will flex, but the grout will crack and allow water to penetrate.
Finazzle Tile & Grout Cleaner has not been discontinued. It is still available for purchase.
You can tile over existing tile although it isn't reccomended. You would be safer by removing the tile and then installing the new tile. But, if you wanted to tile over existing tile you would have to make sure all the tile is even and not lose. If the tile is lose or uneven it will caused the new tile and grout to crack or pop out.
The gaps found between most tile work are called grout lines. After the tile was set those voids or gaps should have been grouted. Luckily it is never too late to apply the grout. You can get a small box of tile grout from any hardware shore. It's real easy to apply. Just follow the instructions on the box.