0
Can I use hydraulic fluid for a substitute for hydraulic oil in a bobcat skid-steer?
Wiki User
∙ 8y ago
Hydraulic fluid and hydraulic oil are one in the same.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
What hydraulic fluid for bobcat 721?
All Bobcats use Bobcat Premium Hydraulic/Hydrostatic Fluid.
Bobcat loader repair How to fix Bobcat Loader that will not lift or tilt. How to replace the Actuator n a 863H bobcat?
A Bobcat loader that will not lift or tilt probably is low on hydraulic fluid. Check the hydraulic fluid and fill to the recommended level.
What type of hydraulic fluid is in a melroe m500 bobcat?
automatic transmission fluid
What is the hydraulic fluid capacity for bobcat 753?
5 galons
How do you change hydraulic oil in 743 bobcat?
where is the drain plug for hydraulic fluid on 743 bobcat
What if too much hydraulic fluid in bobcat skid steer?
Then you'll have excessive hydraulic pressure, and could damage the hydraulic system.
What type hydraulic fluid in bobcat 753 skid steer?
che tipo di fluido idraulico in bobcat 753 skid steer
What hydraulic fluid should I use for a Bobcat 722 model?
10W-30 or 10W-40 works.
What hydraulic fluid filter for a 742B bobcat?
It should be 6598903 which crosses over to a Napa Filter 1482
Hydraulic capacity for a bobcat 600?
It uses hydralic fluid not transmission fluid and takes about 5 gallons. It uses hydralic fluid not transmission fluid and takes about 5 gallons.
What weight Hydraulic oil for 773 bobcat skid steer?
The best thing to use is the Bobcat "orange" Hydraulic fluid. Actually you dont use hydraulic fluid in a skid loader you need to use hydrostatic transmission fluid. Drive relief pressures are in excess of 5000 psi, the fluid needs to drive the machine as well as make the lift arm raise up and down. If you cant get the Bobcat stuff than use 10w30 or better MOTOR OIL. Dumping ISO 46 or AW32 can be a very costly mistake.
What type hydraulic fluid in bobcat 643 skid steer?
Use Bobcat (Orange) Hydraulic Oil. If you don't have access to this use hydraulic ISO 46 for temps of -40 to 80f. Use ISO 100 for +40 to 120f. 10w30 motor oil will also work in a pinch but try not to mix....go back to hydraulic at next change.
