Yes, you can use two different serial devices at the same time.
A y-splitter splits one cable into 2. it can have a variety of connectors to do different lobs but all go from one connector into 2.
A component video splitter allows a signal to be transmitted from one device to others. One can connect their cable and with the use of a splitter allow it to be transmitted to a different device.
To link 2 computers you should have cross cable. Because Serial cable is user to connect 2 or more dissimilar devices. To connect 2 similar devices like computers, Hubs, Switches you should use Cross cable only.In Serial cable 4 pairs of cables are their, 2 pairs for Transmitting and 2 pairs for Receiving the Data. If you use serial cable to connect 2 computers, Conflict will happen while sending and receiving the data. In cross cable 2 pairs of cable will be in a different order so conflict won't happen. So use Cross Cable while connecting 2 similar devices.
A component splitter is a cable and box that allows for the use of multiple devices that all require being plugged into an av/component port. This cable and box combo accomplishes that task by having more than enough plugs for all the needed devices. Component splitters can cost anywhere from the $10 to $100 dollar price range and are quite useful for when several component input devices are in use.
Radio Shack.
To extend a network, Ethernet cable splitters, hubs, and network switches can all be used. Each of these devices has its own set of advantages and disadvantages. We'll go into how each of these useful tools works, how they vary from one another, and how to use them effectively in this guide.
"An ethernet cable splitter allows you to connect two computers to one ethernet connection. Once you have your splitter made, you plug it into both computers just as you would with a normal ethernet cable."
Once considered a highly technical device only for the most technologically capable, the cable modem is now a tool used in the vast majority of households. If you want to use your cable modem in the same general area as your television but you are having trouble with just one cable jack, then maybe you should invest in a splitter. A splitter will essentially make it so that you can run one cable to the modem, and one to the television. This can be an excellent alternative to having two separate devices in different locations of your home.
Yes, using a proper splitter is better than a Y cord.
The best websites to buy a component cable splitter are eBay or Amazon, as they tend to be a little cheaper than elsewhere. It is also possible to buy the cable splitter from a more specialist website such as TV Cables.
it can
The splitter allows you to connect two printers to one computer.You can then share then over your network by enabling it in windows.Open your control panel and use the interface.It's not that difficult.