Want this question answered?
Yes, although you might have lucked out and tripped the breaker first.
If the motor is designed for 120V or 220V whatever the case, it will function properly.If it is a 12V motor and you supply 120V it will make a mess and you will probably get hurt from flying debris!
First of all, your power source must be 3-phase if you want to run the motor, then you need a step-down 3-phase transformer to give 220v 3-phase output.
NO dear we can not rotate a 110 vlolt motor on 220,but if your voltage is 110v then y can rotate it on 50hz ,no problem,but it will rotate at lower speed, ENGR. NASEER AHMED,PAKISTAN
220V : 12V 55 : 3
AC (Alternating Current) usually provided at either 110V or 220V.
Amp draw is always combined. 220V is uncertain if it is three phase or not, because there are both one phase and three phase applications of the 220V motor. In any case, the answer is always "combined".
220V @ 60 Hz
Short answer: No. (unless you like ruining motors) Longer answer: Not really, but there are some motors that can be re-wired so that instead of 440v they will run on 220v. However, this is not that common. Conclusion: Check the motor to see if it is dual-voltage on it's nameplate. If it is, you can re-connect it to work on 220v. If it is NOT a dual-voltage motor, you will absolutely ruin it if you connect it to 220v.
It depends on the motor. The motor determines the amperage. Should be written on the well pump itself.
Yes, if you rewire the bed and rewire the plug on the wall to 220 volts.
If it is AC, a transformer. If it is DC, a motor generator.
E-Bay
220 volt will use less energy.
If you have a transformer with an output adequate to run the motor, use it directly for the supply to the motor control circuitry. Remember when dealing with motors, the start current will be about 300% of the full load running amperage. Size the transformer accordingly.
motor= 2 h.p 220v=60 hz single phase single capistor 36 solat i have no formula help me how i rewind motor
5 kva