of course a 800KVA DG could be synchronized with 18750KVA DG but there will be some unbalancing/unstability in the system and load sharing could create a problem but it can definetely synchronized and also other should also cheched
voltage rating should be same and phase angle
A synchronized generator, often referred to as a synchronous generator, operates by maintaining a constant speed that matches the frequency of the electrical grid it supplies. It uses a rotating magnetic field produced by direct current in the rotor, which interacts with the stator windings to generate alternating current (AC). The generator's synchronous speed is determined by the frequency of the AC system and the number of poles in the generator. This synchronization ensures that the generator can efficiently produce power and maintain stability within the electrical grid.
To determine the amperage a 800 kVA generator can provide, you can use the formula: Amperage (A) = kVA × 1000 / Voltage (V). For example, at a standard voltage of 400V, the calculation would be 800,000 VA / 400V = 2000 A. Therefore, a 800 kVA generator can deliver approximately 2000 amps at 400 volts. Always ensure to consider the power factor and local regulations when calculating loads.
The generator has to be synchronized to the power line before it can be connected. If connected out of phase there is a chance that the generator will motorize and this could break the crankshaft of the prime mover.
a synchroscopeis a device that indicates the degree to which two systems (generators or power networks) are synchronized with each other.ayaz ahmad4th engineer
It is a device that synchronize the electrical current from an emergency generator and main utility. It is usually used to prevent blink when main utility power comes back. It synchronized both current and slowly moved the load from emergency generator to main utility and released the emergency generator from the load.
The electrical power generated must be AC exactly phase synchronized with the AC on the power grid. If it is not synchronized the generators will take power from the grid and try to run as motors and probably severely damage themselves and maybe other parts of the power plant.
Synchronized Methods are methods that have the keyword synchronized in the method signature. Synchronized statements are pieces of java code that are surrounded by brackets which have the keyword synchronized qualifying them. Both cases mean that - only one thread will be able to access the method or the statement that is synchronized
It depends, there are a few. All of them are pretty simple. Synchronized swimming Synchronized skating Synchronized diving
There are synchronized by the clock System.
dancing, swimming, iceskating and watches can be synchronized
Synchronized.
Depends on the voltage. VA = Volts x Amps. 800kva = 800,000 VA