0
What else can I help you with?
Can you use a device requiring 5 volts and 2 Amp with an adapter supplying 5 volts and 1 Amps?
The supply device must have an output voltage that matches that of the load, and a current rating that exceeds that of the load. So you cannot use a load that draws 2 A from a supply device that is rated at only 1 A.
Will a 7.5 V 1500 mA power adapter work with your 75 V 1600 mA device?
No it will not. The adapter with an output voltage of 7.5 volts will not even come close to operating a device that requires a 75 volt supply. The best thing you can try is to find an adapter that will output the 75 volts that the device needs.
For a device requiring DC 6V 1000mA will a DC adapter output 9V 1000mA also work for this device?
A device which requires 1000mA at 9 volts in order to operate will not work from an output of 500mA. This output is only half the power requirement of the device.
Would a device requiring dc 9V 1000mA output work with an adapter with dc 5V 3A in output?
No. Usually it's a -/+ 10% difference. So, a 9v would need at least 7.2 volts or more
Can you use a 9 volt dc adapter to power a device that calls for 10 volts dc?
Yes. However, the device me not run at its optimum capacity/speed. Other thing to take into consideration is that the polarity (+/-) of adapter and the receiving device must match.
How can I convert a 240 volt power source to a 120 volt power source using a 240 volt to 120 volt adapter?
To convert a 240 volt power source to a 120 volt power source using a 240 volt to 120 volt adapter, simply plug the adapter into the 240 volt outlet and then plug your 120 volt device into the adapter. The adapter will step down the voltage from 240 volts to 120 volts, allowing you to safely power your device. Make sure the adapter is rated for the appropriate wattage to avoid damaging your device.
Can you use replace 5V 3.6A ac adapter to 5V 2.6A ac adapter?
Well, trying to clarify your question, if you have a device that normally has a 5V 3.6A adapter, than it likely needs to be able to draw up to 3.6 amps or so for the device to operate normally. So, a 5V 2.6 amp adapter may operate at times, but only when the device is trying to draw less than 2.6 amps. If the device tries to draw more than 2.6 amps than you run the chance of burning out your transformer (the AC adapter), or just not having your device work. Both adapters will put out the 5 volts, but the 2.6 amp adapter will not provide enough current. You can safely use a larger adapter than the 3.6A, as your device will only draw as much current at 5 volts as it needs. On another note, do not try an adapter that puts out the same current but more voltage. Such as 7.5 volts 3.6 amps. This will overdrive your device and potentially burn it out.
Will a 9v 3500mA power adapter work to replace a 9v 3.5A adapter?
No, the voltage is wrong. The device needs an adapter that only produces 5 volts. The device that you need may state on it 2500 mA instead of 2.4 amps
What is the difference between a 9v 300mA Adapter and a 12v 300mA Adapter?
difference is 2.7 amperes in numbers will be 12 volts 3 amps and the other will be 12 volts .3 amps
Will a 9v DC adapter damage a device that requires a 6v DC adapter?
Yes, the manufacturer specifies what the working voltage of a device will be and that voltage has to be adhered to.
Can a device using 4.5v 75mA use a adapter at 3v 1000m?
Unlikely. 3 volts in stead of 4.5 volts is a too big gap between that it gets and what it expects.
Can you use 5v 1000ma adapter on a 45v 400ma device?
No you can not. The power supply output of 5 volts is under sized. There is no way that a 45 volt device would operate from it. You will need to find a power supply of 45 volts.
