'Can' yes. 'Should' no.
<<>>
Never use a green wire for a neutral. It is colour coded for a reason and that is to protect the people that work on electrical equipment. If you turn a ground wire into a neutral it then becomes a current carrying conductor. There are times in the electrical trade when grounds have to be disconnected and if it is used as a neutral and the tradesman is holding one end and touching a grounded object a shock will occur. Again never use a green ground wire as a neutral.
Brown = Hot Blue = Neutral Yellow/Green = Ground
In Bangladesh the color of live is green and neutral is blue and ground is black.
The white is neutral. The house does have a neutral wire even though it may be black. One of those black wires is the neutral and the other is the hot wire. You will have to determine which is hot and which is neutral. You can easily do this with a voltage tester. The wire that lights the tester is the hot. When you wire the light simply wire the hot to hot, and the white and green to the other wire.
White is the neutral wire. Black is hot, green is ground.
Normally red or black is the hot wire and green is the ground. However someone may have used the green wire as the neutral wire which is normally white. Just connect the black wire from the light to the red wire and the white wire from the light to the green wire and see if it works. If not you have to pull the wires out of the ceiling box and see how they wired it.
Brown = Hot Blue = Neutral Yellow/Green = Ground
Red is hot Green is ground White is neutral
In Bangladesh the color of live is green and neutral is blue and ground is black.
More information is needed as to what device you are connecting to what power supply. The only two identifiable wires are the white and green. In North America the white colour is used for the circuit's neutral and the green is used for grounding of devices.
green
No
More information is needed as to what device you are connecting to what power supply. The only two identifiable wires are the white and green. In North America the white colour is used for the circuit's neutral and the green is used for grounding of devices.
The white is neutral. The house does have a neutral wire even though it may be black. One of those black wires is the neutral and the other is the hot wire. You will have to determine which is hot and which is neutral. You can easily do this with a voltage tester. The wire that lights the tester is the hot. When you wire the light simply wire the hot to hot, and the white and green to the other wire.
The green and yellow is the earth wire The brown is the live wire The blue is the neutral wire A poem to help is: The brown live cow drinks from the blue neutral water and eats the green grass from earth
White is the neutral wire. Black is hot, green is ground.
Normally red or black is the hot wire and green is the ground. However someone may have used the green wire as the neutral wire which is normally white. Just connect the black wire from the light to the red wire and the white wire from the light to the green wire and see if it works. If not you have to pull the wires out of the ceiling box and see how they wired it.
green <<>> In North America the common (neutral) conductor is white. The ground wire is green or bare depending on its location in the system.