Physically yes, but to no avail. The breaker will trip instantaneously as a short circuit will have been introduced into the circuit with this action.
In all wiring the live must never be connected directly to earth. The only place where the neutral and earth are connected together is at the distribution panel where the utility's supply neutral joins the system earth on the distribution panel's neutral bus bar.
no
You will get a short circuit and breaker will trip. If they are tied together on the load side of the switch the short will happen when you turn the switch on.
The Alpha Centauri star system is the nearest to the earth, and it actually consists of 3 stars locked together in a gravitational arrangement. They are about 4.3 light years from the earth.
go to the Help option in Matlab. It will not help at all.
Light switch connection is usually straight forward. Find your incoming hot wires, black and white. With the switch in the off (down) position and the power disconnected , connect the black wire to the top screw of the switch. Find the load wires and connect the black to the bottom screw of the switch. Connect the two remaining white wires together with a wire nut and push them to the back of the switch box. Install the switch into the wall box, replace switch plate cover. Turn the breaker (power) back on. Flip the switch to the up position and the light should come on.
The simple machine in a light switch is a "lever".
It means that the bride and groom are now one and joined together.
no
On a light switch the white wire is neutral. All the neutral white wires are tied together under a wire nut and pushed back inside the box. The white is not connected to the switch.
The brake lights and signal lights are tied together in the signal switch, also known as the "multifunction switch".
It is the brake light switch. The 3rd light has a different switch. GoodluckJoe you can check under neith the bed for fire where they come together. if ther is fire it is the circuit board where your lights go. if there is no fire then its gonna be in the turn signal switch
You will get a short circuit and breaker will trip. If they are tied together on the load side of the switch the short will happen when you turn the switch on.
It is the brakes light switch
where is brake light switch
To control a light with a switch, the switch has to be connected in series with the light fixture.
I think it is about earth day.... were the world switch off there lights for an hour
Light switch was created in 1884.