if they are in your house and have got a programmed international remote pointing at your tv then no - basically, a sort of laser comes out of the top and goes to your tv to change channel and stuff. If they're in their house next door then it'd be impossible because of walls. BUT if they were across the road from you with their windows open WITH an intl. remote programmed for your tv and your window was open and they could see the tv; THEN yes. but unlikely
Another answer, today many remotes can be switched to the Radio Frequency mode from the Infrared mode which would allow a remote in another house close by to control your TV.
MOVE
It saves you having to walk to the television by clicking a button on the remote to change the channel or volume.
press the button on the remote or the side of the tv
I was able to use the code 11314 with my Hisense TV. My Directv remote now controls the volume as well as the on/off power but unfortunately not the tv input.
my direct tv hd remote won't work for changing the channel just turn it on and off and turn the volume up
Sky remote codes are codes made up of numbers that allow you to customize your remote so you can control the volume and change your channels on the TV.
I just found a remote code for my TCL L40FHDM11 tv: 651. It works, but I still have to use the remote that came with the tv to turn it on & off and for volume.
it has the same pin as the other tv
As one sets up a sky remote, they will have access to changing the volume on the television, as well as turning the device on or off, and switching input mode. A Sky television is required to use the sky remote.
With a universal remote... ;) --Sillypinkjade-- ----
I know this tv can be programmed with just about any universal remote or cable remote the onoly problem I've come across is once i programmed the remote and tv if i try to turn the volume up or down the channel goes up or down
Easier and no codes are required; do the following: 1. Turn the TV on with your TV remote. 2. On the new remote HDA-IR2, press "Prog" and "TV" buttons at the same time until the red LED is on; release. 3. Press the "TV" button again to start the auto search and aim it towards your TV. 4. The remote will cycle through the stored codes. The TV will turn "off" when the right code is log in. You should imediately press "Prog" to stop the cycling, the code will then be saved in the new remote. 5. Press the "TV" on the new remote; your TV should turn "on". If not start over again..you were slow at pressing the "Prog" to stop the search. 5. Next program the Volume control, Press "Prog" and "TV", release, and press "Vol-" ... new remote will blink twice. This will control your black box volume. You can set the black box to near max and control the volume using the TV volume. 6. Now press "Prog" and "TV", release, and press "Vol+". You now can control the volume of your TV. If the sound is compresse or fuzzy, lower the black box volume. kaicho8888