No, pull in a separate feed for the single phase receptacle.
A single-phase transformer works with a single-phase supply, while a 3-phase transformer is used with a 3-phase supply. A single-phase transformer has 2 wires on the primary and secondary (ignoring taps) while a 3-phase tansformer has 3 or 4 wires on the primary and secondary.
126 volts sounds very close to a standard home voltage of 120 volts, which is single phase. 208v is a three phase voltage, and is the lowest I have seen. 240 is single phase (usually center tapped, so in your house you have +120, and -120 referenced to the neutral which provides the normal 240 for dryers, stoves, etc.).
Yes, there is a difference between single phase and three phase circuits.
There is no such thing as a two phase instrument. There is only single phase and three phase. You can only have: single phase/ one pole single phase/ two pole three phase/ three pole
one windingAnswerA three-phase motor has three phase windings, normally (but not necessarily) connected in delta.
single phase, double phase & three phase
No A intermediate switch can not be used to change three phase to single phase.
Single phase.
NEMA 14-30 plugs are typically used for single-phase 240V systems. If you have a three-phase 220V system, you will need to use a different plug and receptacle that is rated for three-phase power. Make sure to consult the electrical code and a licensed electrician for proper installation.
The difference between a single phase and a three phase motor is the amount of power conductors that feed the device. As to the other part of the question a three phase motor will not start or run on single phase. The phase angles on three phase are 120 degrees apart on a single phase system they are 180 degrees apart.
Single phase inherently requires less equipment (it's cheaper). Three phase motors are more efficient than single phase.
Yes, there a difference between three phase and single phase electrical supply services.