All car door chime modules cannot be fitted or retrofitted. Certain models are highly proprietary which severely limits the options when using anything but the original equipment.
The chime module is located underneath the left side of the dash right abve the fuse box.
To disconnect the door chime on a 1988 Buick Reatta, locate the chime module, which is typically found behind the dashboard or near the fuse box. Carefully unplug the connector from the chime module to disable it. If you prefer not to remove the module, you can also disconnect the door switch wiring, but this will disable the door chime function entirely. Always consult the vehicle’s service manual for specific details and diagrams to ensure proper disconnection.
On a 2005 Ford Freestar, the door chime is typically located within the vehicle's instrument cluster or integrated into the vehicle's body control module. To hear the chime, ensure the driver's door is open, as it activates when the key is in the ignition and the door is ajar. If you're experiencing issues with the chime, checking the fuses related to the body control module may also be helpful.
To disable the door chime on a 2002 Toyota Tacoma, locate the chime module, which is typically found under the dashboard near the steering column. You can either disconnect the module or remove the fuse associated with the chime system. Alternatively, some users have found success by adjusting the door switch or securing the door more firmly. Always consult your vehicle's manual for specific instructions related to your model.
To disable the door ajar chime in a 2002 Kia Sportage, locate the chime module, which is typically found under the dashboard or near the steering column. You can either unplug the module or cut the wire leading to the chime. Alternatively, you may also try adjusting the door switch or ensuring that all doors are properly closed to prevent the chime from activating. Always exercise caution when working with vehicle wiring.
Door chime is in the Computer module on the driver side by the gas pedal in th e center console. Cut the black wire with the yellow stripe and the chime is gone. forget the crap about spraying door switches with wd40.
In a 1998 Ford Windstar, the door chime is typically located within the instrument cluster or dashboard area. It is activated by the door switch when a door is open and the vehicle is in a certain state, such as when the key is in the ignition. If you're having issues with the chime, it may be related to the door switches or the chime module itself. Checking the vehicle's manual can provide more specific guidance.
It is in the GEM control module under the dash. Brain of truck..
To disconnect the door chime on a 2011 Toyota Tacoma, locate the chime module, which is typically found beneath the dashboard, near the driver's side. You can unplug the connector to disable the chime. Alternatively, you might also remove the fuse associated with the door chime from the fuse box. Always refer to your owner’s manual for specific instructions and precautions.
Audible chime module is located behind the glove box - right lower corner viewing from passenger seat looking forward. The module sounds for many items, lights, door ajar, etc - pin #4 red / pink is the wire coming from drivers door input...
Yes, you can disable the warning chime on a 2001 Pontiac Grand Am by locating the chime module, which is typically found under the dashboard. You can either disconnect the module or remove the specific wire that triggers the chime when the door is opened with the key in the ignition. However, be cautious as this may affect other warning sounds in the vehicle. Always consult your owner's manual or a professional mechanic for guidance.
It should be located under the dashboard. usually behind the center console (heater controls, stereo etc...) You should be able to just pull out the wire that is fitted into it. But be careful. The same chime is used to let you know if you've left your headlights on, or your keys in the ignition.