0
Can an Ethernet hub be used to hook up multiple Ethernet devices at one time?
Wiki User
∙ 11y ago
An Ethernet Hub allows the user to hook up to four ports at one time. The Hub will allow you to connect multiple devices and allow them to act as one.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you connect a Xbox 360 to a computer?
You hook the console up to the computers ethernet port. They will both be able to be used at the same time.
Network 20 computers to share file printer drives and internet list down all the connectivity device you will need?
A broadband modem, a Wireless Router and a gigabit ethernet switch.Hook any wired devices to the gigabit ethernet switch, hook the switch and connect all the wireless devices to the router, then hook the router to the modem.You will need to find a Broadband company for your internet, Cable TV company for cable internet or a Phone company for a DSL connection.You will need a Wireless Router (most also combine 3 or 4 ethernet ports) and possibly an 8 or 16 port GigabitEthernet Switch if you have more then a few wired devices. You have to know the fastest speed the computers and devices are capable of to get the most speed you can. At least have the router an "N" rated speed so when the computers get updated any slower rated ones will have the updated higher N speed cards. Your network will slow down to the slower device speed every time it connects to the network then go to the fastest speed of the next device that connects.Simultaneous dual band router would be the best, it would keep the slower devices on one band and the faster devices on the other so they don't slow down the network.Printers only access the network for a few seconds at a time so the speed isn't as big problem for them.
What is collison domain?
A collision domain is a physical network segment where data packets can collide with one another when being sent on a shared medium.A group of Ethernet or Fast Ethernet devices in a CSMA/CD LAN that are connected by repeaters and compete for access on the network. Only one device in the collision domain may transmit at any one time, and the other devices in the domain listen to the network in order to avoid data collisions.A collision domain is sometimes referred to as an Ethernet segment.
Will an Ethernet splitter reduce my internet speed?
Yes, if both lines of the internet are being used at the same time. Just like if you use Wi Fi and multiple people are on.
How do you calculate back-off time on an Ethernet link after a collision?
calculate backoff time on an Ethernet link after a collision? Select one:
Can you have multiple devices and users on one mac?
You can set up multiple user accounts on a Mac but only one user can use the computer at a time. If by devices you mean external hard discs, printers, cameras, midi keyboards etc. etc. then yes that will not be a problem.
How does an Ethernet switch work?
Ethernet switches, both unmanaged and managed, avoid collisions by routing the messages in an Ethernet network to only the intended devices. When a switch receives an Ethernet message (packet), it reads the address of the device for which the message is intended, and then transmits the message out of only the port to which that device is connected (even if it is connected through several other switches). When the switch gets the first bit of information from the first device, such as your computer, it reads the MAC address of that device. The MAC address is the media access control number. This number is an ID number that is assigned to most network adapters and is preset by the manufacturer. Once this number is read, it is recorded in memory by the switch. Next, the switch attempts to look for any other devices on the network by sending out packet requests of information. Once another device gets this packet, it sends out a signal to the switch to acknowledge the request. Now the MAC address of this device is recorded. Each time these packets are sent, the information is "time stamped." The switch then works to filter this information that is communicated among all of the devices. The switch has enough memory to retain this information. Industrial applications of Ethernet (called industrial Ethernet) require special Ethernet switches that have industrial ratings for noise immunity, shock, vibration and temperature in a wide range of form factors with multiple options for copper and fiber connectivity. See link below for examples of industrial Ethernet Switches from Phoenix Contact.
How do you have both internet and online gaming at the same time?
To have both the internet and online gaming at the same time with one ethernet connection you need to buy a network switch or a router. Basically what you are doing is splitting up the one internet connection into multiple.
How can you check to see if the fast Ethernet interface on a router is connected to a fast Ethernet interface on another networking device?
Just properties of the network card. The speed of connection is there. Knowing the speed and capabilities of the network card you are looking at, you can find out which interface is used at another end. PS: The speed you will see is the highest both devices can support in the same time.
How does Powerline Ethernet work, how can data transfer over electricity cable?
If you are facing an electrical data cabling problem in Sydney, then look at the answer below. Ethernet work is a local area network protocol that provides internet connection wirelessly to all the nearby devices and transfers the data of 10 MB per second. The ethernet cable holds various copper wires that transmit the data and information between two devices by using the internet. These cables connect multiple devices and connect devices to both Local area Network (LAN) and Wide area networks(WAN) External data can be carried over the wiring of the main power. The types of signals generated and selected at each end can be conveyed from a single pair of wires at the same time. There are multiple wires, and at the end of each one of it, there is an adapter connected to a router, while the other wire is connected to a computer, printer and other wi-fi enabled devices. The short connections can also be established via ethernet cable to televisions. The data signals are then processed forward and converted into low radio frequencies that very well propagate the paired power cables of domestic wiring. The signals that are generated because of this are paired into a wire that optimises the transformers, and the power line frequency gets blocked. This also disconnects high voltage AC on the cables. This might lead to problems which can result in data loss and low-speed ethernet. They might make a lot of noise or interference on the power line. Such devices work better when they are induced with wifi. They are most convenient for fixing apparatus. Thus, this can be a good economical alternative to the hard-wiring ethernet cable. The use of cable is quite common. Satellite dishes intake the power just as the TV does. Ethernet is considered the fastest medium for communication and transfer of data. Though it comes with a lot of overheads, still it can be avoided by using protocol design just for sending audio and video signals. Thus, this is how the data is transferred through electric cable in internet devices and the powerline ethernet work. If you are impressed with the protocol and wish to use the same process to put up home data cabling in Sydney’s home then visit Electrosecurity to add an easily accessible internet.
Why does your computers internet crash when you play ps3?
No. A PS3 and a computer can be ran at the same time. A internet wireless network box is able to send a signal to multiple devices.
What is Dual ethernet for?
to allow for transmission on two separate LANs at the same time. Perhaps the most common application of dual Ethernet is in firewall machines.
