0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can regular insulin and nph be mixed together?
Yes, regular insulin and NPH (Neutral Protamine Hagedorn) insulin can be mixed in the same syringe. This combination is commonly referred to as "mixed insulin" and is used for certain insulin therapy regimens. Regular insulin is a short-acting insulin, while NPH insulin is an intermediate-acting insulin. It's important to follow proper mixing techniques to ensure the effectiveness of the insulin and to avoid contamination. Here are general steps for mixing regular insulin and NPH insulin in the same syringe: Wash your hands: Clean your hands thoroughly with soap and water. Gather supplies: Collect the vials of regular insulin and NPH insulin, a syringe, and alcohol swabs. Roll the NPH insulin vial: Gently roll the NPH insulin vial between your palms to ensure uniform suspension. Clean the rubber stoppers: Wipe the rubber stoppers of both insulin vials with alcohol swabs. Draw up air into the syringe: Draw air into the syringe equal to the dose of NPH insulin needed. Inject air into the NPH insulin vial: Insert the needle into the NPH insulin vial and inject the air. Draw up NPH insulin: Invert the vial and withdraw the correct dose of NPH insulin. Inject air into the regular insulin vial: Insert the needle into the regular insulin vial and inject the air. Draw up regular insulin: Invert the vial and withdraw the correct dose of regular insulin. Check for air bubbles: Hold the syringe upright and tap it to dislodge any air bubbles. Push the plunger slightly to remove any air. Verify the dose: Double-check that you have the correct total dose in the syringe. Administer the injection: Administer the injection as prescribed by your healthcare provider. Always follow the specific instructions provided by your healthcare provider or the insulin manufacturer. If you are unsure about the proper technique for mixing insulin or have any concerns, consult with your healthcare team for guidance.
How can you manufacture disposable plastic syringe?
Plastic syringes are typically manufactured by a process called injection molding. The machines used are called injection molding machines. These machines inject liquified plastic into a mold which is the shape of a syringe. When the plastic cools, it forms a syringe.
What is the difference between a tuberculin syringe and an insulin syringe -?
They are made for administration of specific measurements of either insulin or the antigen for TB testing called PPD (Purified Protein Derivative). Both types of syringes are calibrated into "units". Unit measurements are fixed measures but specific to each type of medicine/solution as to their volume. A unit of insulin is not the same thing as a unit of TB antigen, so the TB syringe can not be used in the place of an insulin syringe. Insulin is administered with the insulin syringe "subcutaneously" (under the skin) in the subcutaneous (sub Q) tissue. The needle is slightly longer than that on a TB syringe. The antigen solution is administered in the TB test "intradermally" (within the skin/between the layers of the skin) instead of under the skin, so the needle is shorter. The amount of liquid in a dose of TB antigen is much smaller than the amount usually given of insulin. Therefore, the barrel of the TB syringe is smaller in diameter to allow such very small amounts (drops) of antigen to be measured. In addition, insulin syringes come in two scales of measurement: U-100 and U-40. This on the label of the syringes indicates which type of insulin they are made to measure and administer. The insulin vial will also be marked either "U-100" or "U-40". One strength is 100 units of insulin per mL and the other is 40 units of insulin per mL. A different insulin syringe is need to measure U-100 than the type used to measure U-40. Unit calibration on the syringe used must be matched to the "strength" of the insulin being used. U-100 insulin has 1/100 of a mL volume per unit (equal also to 1/100 of a cc). U-40 insulin has 1/40 of a mL volume per unit.
Is it illagel to poesses a syringe?
depends on what you are using it for. If you are diabetic and can prove it was used for insulin (prescription, doc's note, etc) then it is legal.
For injecting insulin which disposable syringe has the finest needle?
The syringes used for insulin administration can be fit with many sizes of needles. The finer needles have a higher gauge number....a 28 gauge needle is bigger/fatter than a 31 gauge needle, which is considered ultra-fine. The size of the syringe depends on the amount of insulin to be injected.
What is the difference of tuberculin to insulin syringe in terms of measurements?
They are made for administration of specific measurements of either insulin or the antigen for TB testing called PPD (Purified Protein Derivative). Both types of syringes are calibrated into "units". Unit measurements are fixed measures but specific to each type of medicine/solution as to their volume. A unit of insulin is not the same thing as a unit of TB antigen, so the TB syringe can not be used in the place of an insulin syringe. Insulin is administered with the insulin syringe "subcutaneously" (under the skin) in the subcutaneous (sub Q) tissue. The needle is slightly longer than that on a TB syringe. The antigen solution is administered in the TB test "intradermally" (within the skin/between the layers of the skin) instead of under the skin, so the needle is shorter. The amount of liquid in a dose of TB antigen is much smaller than the amount usually given of insulin. Therefore, the barrel of the TB syringe is smaller in diameter to allow such very small amounts (drops) of antigen to be measured. In addition, insulin syringes come in two scales of measurement: U-100 and U-40. This on the label of the syringes indicates which type of insulin they are made to measure and administer. The insulin vial will also be marked either "U-100" or "U-40". One strength is 100 units of insulin per mL and the other is 40 units of insulin per mL. A different insulin syringe is need to measure U-100 than the type used to measure U-40. Unit calibration on the syringe used must be matched to the "strength" of the insulin being used. U-100 insulin has 1/100 of a mL volume per unit (equal also to 1/100 of a cc). U-40 insulin has 1/40 of a mL volume per unit.
Is the tuberculin syringe used to measure doses larger than 3 ml?
NO. A tuberculin syringe will only hold up to one ml. It is very useful, and appropriate for measuring any amount equal to or less than one ml. Also...It is NOT appropriate to try to use an insulin syringe for this purpose, as some people try to do. Insulin syringes are measured in *units*, not milliliters and therefore will not give an accurate reading of ml's. This is a potentially dangerous practice. If you have no other option...100 units = 1ml approximately...or so I am told. Get the right tool for the job!! Insulin needs to be measured accurately each and every time. It is not worth risking your life. Get the right syringe for administrating insulin!!
All patients with diabetes need injection?
False. Not all patients with diabetes need an injection. There is currently non injectable medication on the market used to adjust insulin levels and to control diabetes.
When were the first injections?
Although in 900 A.D. an Egyptian physician used a syringe-type instrument for a medical procedure, the first successful injection was given by Dr. Francis Rynd in 1845. Doctor Alexander Wood is credited for inventing the glass syringe in 1851.
What are the subunits of insulin?
Insulin comes in various concentrations. 40U insulin means that there are 40U (or "units") of insulin in 1ml while 100U insulin means that there are 100 units of insulin in 1ml. It should also be noted that insulin syringes come calibrated to the type of insulin they are to be used with, so you should never use a 40U syringe with 100U insulin, for example, without consulting your doctor for the correct dose with the mismatched syringe.
What syringe is used for a vein graft procedure when asked to draw up 0.3 ml of a drug?
Normally when working with injection medications, always go with the smallest syringe. If asked to withdraw 0.3 mL then use a 1mL syringe. If that isn't doable, then use the 3mL syringe. If asked to draw 4mL, use the 5 and so on. As far as a vein graft however, I believe a 3mL syringe will create higher peak pressure and velocity than that of a 10 or 20 mL syringe.
What is the omni pod?
An omnipod or An insulin pump is a medical device used for the administration of insulin in the treatment of diabetes mellitus, also known as continuous subcutaneous insulin infusion therapy. The device includes: * the pump itself (including controls, processing module, and batteries) * a disposable reservoir for insulin (inside the pump) * a disposable infusion set, including a cannula for subcutaneous insertion (under the skin) and a tubing system to interface the insulin reservoir to the cannula. An insulin pump is an alternative to multiple daily injections of insulin by insulin syringe or an insulin pen and allows for intensive insulin therapy when used in conjunction with blood glucose monitoring and carb counting. A celeb such as Nick Jonas uses this as soon as he found out he had diabetes
