Yes, if water penetrated into an electrical connecter.
Yes, if water penetrated into an electrical connecter.
To check a engine light you need some kind of scan tool and it will show you what kind of code or codes is set for the engine light to go off.
The engine is overheating - see a mechanic for a professional diagnosis .
Jumping the pin connector on the ECU will allow the check engine light to flash on the dash console. The check engine light will flash repeatedly and show codes.
Yes, when you turn on the ignition the Check Engine light will come on for a few seconds to show you the light is working. It will go out if no problem is detected.
Yes, and it may show up as a random misfire.
Something has gotten water on or in it, and is causing a misfire. You need to find what is wet and dry or replace it. The plug wires, coil , distributor cap are all places that could hold the problem. If you have the code checked it should show which cylinder is the problem.
no the check engine light won't come on for that vehicle engine light are mainly for emissions related items...if you have a overhead centre console that shows the direction and gas lilage and all that stuff it will show up as perform service soon
The check engine light comes on when you turn the key to the on position to show you that it is not burnt out. If it doesn't come on for that brief period then the bulb just needs to be replaced.
It is your "check engine" light. It is telling you that something is wrong with the engine or engine controls. It could be minor or major. You will need to get the "codes" read to find out the problem. Use a code scanner to find out what is wrong.
Drive it for a few days and log some miles on it and the check engine light may go out. Mine used to set a check engine light on really hot days here in the desert. I was told then engine and the computer have to go thru x amoutn of cycles and if the problem doesn't show up during those cycles, the check engine light will turn off. Enevtually the light came on to stay and my problem turned out to be a weak fuel pump.
If the "check engine" light is on, use a code scanner to find out what's wrong. You can borrow, rent or buy a code scanner from most auto parts retailers. Sometimes they'll even show you how to connect it and how to read the results.
no, its a washed up show with washed up actors dont waste your time