To protect a circuit, we use a fuse or circuit breaker. The fuse or circuit breaker must always be placed in the lineconductor, never in the neutral conductor. So, if we want to completely isolate a circuit from the supply, we must remove the fuse from the line conductor, and open the link in the neutral conductor. A 'link' is a non-fusible metal break point in the neutral.
To electrically isolate the secondary circuit from the primary circuit, without changing the voltage.
It does not have a circuit breaker. It uses a fuse to protect the circuit. Look for a blown fuse in the fuse panel under the dash on the drivers side.I believe the cigarette lighter circuit is protected with a glass barrel fuse not a circuit breaker. Check the fuse box for a blown fuse.
When there is a fuse, yes it is part of a circuit. The fuse is a cheap, replaceable circuit breaker to avoid damage to the circuit components.
a fuse is a way to secure a circuit from owerload, so a fuse is in a way a circuit in a circuit that owerload itself and breake the circuit inside itself to not damege the rest of the circuit. OR some thing conected to that sircuit.
A circuit breaker does not have a wire fuse in it.
circuit breaker, or "resettable fuse", which is a reallya small circuit breaker in the housing of a fuse
A fuse is a device used to keep electrical circuits from overheating is not a true statement. A fuse is used to protect the wire of the circuit from an over current being applied to the circuit. This over current could be caused by a couple of scenarios. Two non insulated conductors touching one another and creating a short circuit. Another cause could be an non insulated conductor touching adjacent grounded equipment. Whatever the cause the fuse will isolate the fault instantaneously.
A fuse is a device used to keep electrical circuits from overheating is not a true statement. A fuse is used to protect the wire of the circuit from an over current being applied to the circuit. This over current could be caused by a couple of scenarios. Two non insulated conductors touching one another and creating a short circuit. Another cause could be an non insulated conductor touching adjacent grounded equipment. Whatever the cause the fuse will isolate the fault instantaneously.
A fuse is a device used to keep electrical circuits from overheating is not a true statement. A fuse is used to protect the wire of the circuit from an over current being applied to the circuit. This over current could be caused by a couple of scenarios. Two non insulated conductors touching one another and creating a short circuit. Another cause could be an non insulated conductor touching adjacent grounded equipment. Whatever the cause the fuse will isolate the fault instantaneously.
A circuit breaker/fuse is designed to protect the wiring from getting overloaded.
An example of a circuit protection device is a fuse. Another example is a circuit breaker.