It doesn't quite work that way. You don't specify the coefficient of friction for "glass", or from "wood", etc.; you specify the coefficient of friction between a PAIR of substances, sometimes also including any substance in between, such as lubricants. For example, you would specify the coefficient of friction:* Between glass and glass (dry) * Between glass and glass (wet) * Between glass and wood * Between wood and wood * Between tiles and leather (this might be interesting, since shoes are often made out of leather) etc.
It depends if the wood is damp or dry; if damp, then wood is much better - although still much worse than metals. However, if the wood is dried - oven dry is the technical term - then glass and wood are about the same.
Wood.
glass and wood stupid First of all this is wrong Whoever did this because glass u can see through it and what do you Need wood for????
Depending on the glass, it has a K value between 0.8 and 1.1 Wood has a K value of between 0.04 and 0.4 The higher the K value the better the thermal conductivity. Thus glass has a higher thermal conductivity than wood.
Epoxy is best for gluing glass to wood.
glass
Wood is a better thermal insulator than glass, which is easily cooled.
Yes, plastic and composite decking can be screwed directly to wood framing members.
One reason is that when a wood screw is screwed into a piece of wood, the wood fibers expand and cut off the oxygen. Without oxygen there is no oxidation.
yes losers
glass and wood
It doesn't quite work that way. You don't specify the coefficient of friction for "glass", or from "wood", etc.; you specify the coefficient of friction between a PAIR of substances, sometimes also including any substance in between, such as lubricants. For example, you would specify the coefficient of friction:* Between glass and glass (dry) * Between glass and glass (wet) * Between glass and wood * Between wood and wood * Between tiles and leather (this might be interesting, since shoes are often made out of leather) etc.
If this is a sheet of glass, degrease it first.
The best insulator in descending order is, glass, plastic and then wood.
It depends if the wood is damp or dry; if damp, then wood is much better - although still much worse than metals. However, if the wood is dried - oven dry is the technical term - then glass and wood are about the same.
Wood planks, Oak wood, Glass (or Glass Pane), Door(s), Crafting Bench, Furnace, and a Bed.