0
yes! connect all the bulbs in parallel.. i.e. battery positive terminal will be tied to one side terminals of bulb and other terminal to the other. but it will result in less power delivered.. and fast battery usage..
Wiki User
∙ 14y ago
Amina Raza
Amina Raza
Yes. It is possible but the amount of light from the bulbs will be very less as there are so many bulbs for just one battery. But if there are, for example four bulbs and four batteries, the amount of light from each bulb will be equal.
Wiki User
∙ 11y agoyes
Add your answer:
Earn +20 pts
Which device controls the flow of electrons in an electric circuit?
Flow of electricity in a circuit is controlled by using 'resistor'.
Does an electric fan work by using a series circuit?
If there is only one fan in the circuit then it is in a series circuit. If there is more that one fan then they will be connected in a parallel configuration.
What is a cell in a circuit?
The function of a cell in an electrical circuit is to push the lectrons around the circuit. It can also be the source of charge in an electrical circuit.
Is it necessary to have cell in electric circuit?
A cell basically works as a producer of a potential difference in the circuit which is necessary for the electrons to travel in a region. Therefore using this principle we can understand that almost anything that can produce a PD can be used in an electric circuit. The best example would be of emf through EM induction of the Faraday's experiment
What will happen if a thick copper wire is used in fuse?
If a thick copper wire is used in a fuse then by definition of a fuse this device would no longer be defined as a fuse. A fuse in a circuit is used to protect the conductors feeding the load of that circuit. The circuit, if using a thick copper wire in a fuse, would then be considered as a non fused circuit.
Could you build a working electric circuit using glass rods as the conductors why or why not?
Could you build a working electric circuit using glass rods as the conductors? Why or why not?
Can you use a battery to make electricity?
make a electric circuit,by using resistors,cll then electricity is produced.
How current electricity moves in a circuit?
You need a source of electrical potential difference, also known as voltage (which is the technical term for what for you call "electric pressure"). The easiest and most common voltage source is a household battery. Hook up the positive electrode of the battery using a conductor (eg. a copper wire) to one end of your circuit and the negative electrode to the other end, and voila, you'll have electric current flowing through your circuit.
How can you start and stop electric circuit?
Using a switch device which starts and stops the electric current around the circuit
What will happen after you make an Electric Circuit?
If you connect the circuit properly the bulb should light up. That means attaching the left side of the battery to the right side of the bulb using a wire and attaching the right side of the battery to the left side of the bulb. If you do that the your bulb should turn on. If it doesn't then try changing the battery or the bulb.
Which device controls the flow of electrons in an electric circuit?
Flow of electricity in a circuit is controlled by using 'resistor'.
How do you connect the parts of a simple electric circuit together so that the light bulb lights up?
Simply connect the -ve of the bulb to -ve of the battery and +ve of bulb to +ve of battery using an electrically conductive wire, the bulb will light automatically.
What 2 elements were found using the electric battery?
silver and zinc
Does an electric fan work by using a series circuit?
If there is only one fan in the circuit then it is in a series circuit. If there is more that one fan then they will be connected in a parallel configuration.
Is arc welding an example of electric current?
No, an example of an electric current would be using a battery to light a lightbulb.
What is a cell in a circuit?
The function of a cell in an electrical circuit is to push the lectrons around the circuit. It can also be the source of charge in an electrical circuit.
How do you build a transformer using a battery charger?
Ni-Cd , Ni-HM and other rechargeable batteries are in massive use now a days.Let me not describe the use , importance and bla bla of the rechargeable batteries.What we are going to talk about here is how to make simple battery charger circuit to recharge your rechargeable batteries.Making a battery charger circuit is very simple , Simply step down the mains voltage using a step down transformer and convert the current into DC and stabilize it using a bridge rectifier circuit.But you might not want to use a transformer in your circuit to maker your battery charger circuit small and handy.If you don't want to use a a transformer to step down the mains voltage then you can also use a resistor and a capacitor to step down the voltage and stabilize it.And you can see the circuit diagram of a battery charger below which is not using any transformer. Battery charger circuit diagram:So here is a simple battery charger circuit diagram:Click on the image to enlarge it:Battery charger circuit diagramYou can see the values of the components used below:R1: 56 giga ohms resistorR2: 220 Mega ohms resistorC1: 105 Kilo pico farad , 250 voltage capacitorD1: IN 4007 DiodeD2: Light emitting diode indicatorD3 : IN 4007 DiodeIf you use the values of the components stated above the circuit can recharge a 3 voltage rechargeable battery , You can change the value of R1 and C1 to get recharge battery of more voltage.
