In terms of annual tonnage, lime ranks first among chemicals used in the treatment of potable and industrial water supplies. Lime is used by many municipalities to improve water quality, especially for water softening and arsenic removal. Indeed, the American Water Works Association has issued standards that provide for the use of lime in drinking water treatment.
In water softening, hydrated lime is used to remove carbonate hardness from the water. Hardness caused by other calcium and magnesium salts, called noncarbonate hardness, is generally treated by means of the lime-soda process, which entails the precipitation of magnesium by lime. The co-produced calcium salt reacts with the soda ash to form a calcium carbonate precipitate. Lime enhanced softening can also be used to remove arsenic from water. Recent changes to the national drinking water standard for arsenic have increased the need for this treatment.
Hydrated lime is widely used to adjust the pH of water to prepare it for further treatment. Lime is also used to combat "red water" by neutralizing the acid water, thereby reducing corrosion of pipes and mains from acid waters. The corrosive waters contain excessive amounts of carbon dioxide. Lime precipitates the CO2 to form calcium carbonate, which provides a protective coating on the inside of water mains.
Lime is used in conjunction with alum or iron salts for coagulating suspended solids incident to the removal of turbidity from "raw" water. It serves to maintain the proper pH for most satisfactory coagulation conditions. In some water treatment plants, alum sludge is treated with lime to facilitate sludge thickening on pressure filters.
By raising the pH of water to 10.5-11 through the addition of lime and retaining the water in contact with lime for 24-72 hours, lime controls the environment required for the growth of bacteria and certain viruses. This application of lime is utilized where "phenolic water" exists, because chlorine treatment tends to produce an unpalatable water due to the phenol present. This process, called "excess alkalinity treatment," also removes most heavy metals.
One of the most common methods of removing silica from water is the use of dolomitic lime. The magnesium component of this lime is the active constituent in silica removal. Lime is also used to remove manganese, fluoride, organic tannins and iron from water supplies.
Answered by:
Gulzar Muhammad Qureshi, Balakot City, District Mansehra, Pakistan
Yes
To clean the water and keep it fresh.
The best way to clean a limestone fireplace is by using a pH neutral stone cleaner. This cleaner is used with warm water and a sponge.
Have limestone rocks in the water source and mesh to take out leaves and what not
Limestone is called limestone because it has lime in it from the sea water it if formed in.
it the limestone is acidic
Geography is destiny because where you are defines what you can and cannot do, what you have and what you do not have, and stuff. It defines what you have such as clean water, oil, cotton, limestone etc.
Limestone erodes with water. Limestone can also erode through water getting in to the cracks and then freezing. This causes the crack to expand and will begin to erode the limestone.
You need to specify the quantities of both the limestone and the water.
it the limestone is acidic
Limestone and Marble Limestone and Marble
Rain water can dissolve rocks like limestone.
Is limestone in well water harmful to the human body