you need to check for hidden Pin's, or bolts, there can be hidden in the center of the panel. an sometime you just need to put some muscle in to it
The front driver side quarter panel on a 2002 Hyundai Accent is mounted with several bolts. Lift the hood and loosen the bolts in the engine bay. Loosen the bolts in the wheel weld, door hinge and to the bumper. Pull and remove the panel outward.
A door panel on a 2005 Hyundai Accent is mounted with screws and clips. Loosen all the mounting screws. Pull the panel outward and pop out the clips. Remove the door panel.
The 1996 Hyundai Accent OBD 2 port is on lower edge of dash next to kick panel
remove the dash board panel around it and take it out
The 1997 Hyundai Accent OBD 2 port is on lower edge of dash next to kick panel
It's under the back seat. Behind an access panel.
It's under the back seat. Behind an access panel.
I have 2000 accent, my fuse box is to the left of your feet as you sit in the drivers seat, on the side panel. There should be a small door. Hope this helps you out.
The 2005 Hyundai Accdent OBD 2 port is on lower left dash next to driver side kick panel
Remove rear seat, there is an access panel for the fuel filter. Remove access panel and have access to fuel filter.
It is behind dash. Directly in front of your left knee. There are 4 screws on panel. Once removed you can pop panel off. There is a metal plate behind that which can be removed. But relay can be accessed without removal of plate. Relay should be black. It's fastened with I think a 3/8" hex head screw.
Access the pump motor through the front passenger wheel panel