Yes depending on how many channels the amp has. You usually want to place each speaker on its own channel. If this amp has at least three channels, the output of the used channels would be 1500 watts / 3 = 500 watts per speaker.
Need to know the voltage the amp operates on.
The latitude is 12° South, and the longitude is 77° West. The location described by those coordinates is a point a few miles northeast of the center of Lima, Peru.
It varies, depending upon your exact location in North America. For instance, the longitude and latitude of Nome, Alaska is significantly different from that of Key West, Florida.
The wire ampacity of #12 copper wire with an insulation factor of 90 degrees C is 20 amps. If the load is of a continuous nature e.g. baseboard heaters then the wire has to be de-rated to 18 amps
The elevation of the Colorado plateau is 5,000 to 11,000 feet.
Need to know the voltage the amp operates on.
yeah it is i had 2 12s and 2 10s hooked up to a 900 watt amp and it hit hard
Get more money
i got two sony xplod 12s and running off an 800 watt amp they sound good
yes but make sure the rms power for each is the same or close at 2 ohms and wire both subs in series-parallel
10
The simplified expression is 40 - 12s
101
2
12s
0.583
Peru