No, something can not be air tight but not water tight.
To seal water and air tight the cap on the end of plastic sleeve that goes through the inside wall to the outside wall.
You have air getting into the water somewhere, go down and make sure every hose and fitting is tight.
one thing they are used for is, if you have an older home and your doors and windows aren't air tight, they will help you keep the drafts out and keep the house more air tight.
Most small airplanes are not air tight (or even completely encased) because thy do not need pressurization. Commercial planes fly at altitudes where there is not enough oxygen to sustain life, requiring pressurization.
It depends on what kind of pump it is. Basically, you put water in the pump chamber and rely on airtight joints and suction to do the rest. -Tight joints are an absolute essential for all pumps. Any air at all in the system will impair the suction.
Yes. Laminating something properly will create a complete air and water tight seal around the document or material. Most laminate film and pouches also provide UV resistance.
It could be something as simple as air getting in through a loose fitting on the pump housing. Make sure both connectors are hand tight.
If something is literally water-tight it means that no water can pass through it. The metaphor means that the security is so good that nothing can get through it.
It is moisture and air that causes metal to rust, therefore if something is air tight and doesn't get much air it can't easily rust.
Place an air-tight cover over the bowl.
It means that something has been sealed tight enough so that no air can get in or out; such as a lid on a jar.
Store something tightly is to make it fit in the least amount of space, or store so it is air tight.
When you inahle, air rushes into your lungs because that is the only pathway air is allowed to travel. The body is designed to be air tight and water tight where it needs to be so that no foriegn material can do damage to the rest of the body.
Canon make their equipment, such as their cameras, waterproof by using air tight casing. The outside of the camera is completely air tight so that no water is able to get into the inside. They also tend to use rubber seals which is another measure to stop the water from getting in.
it can be used to seal things air tight. it can be used to seal things air tight.
Only those caskets are air (and water) tight which are "sealer" caskets, meaning that they are provided with a rubber like sealing gasket between the lid and the base of the caskets. Usually only metal caskets can be sealer caskets.
Space shuttles and underwater craft both must be air tight, and must carry an air supply with them.