Yes -- any type of sound can cause hearing damage, regardless of the frequency (within the audible range).
If at the right frequencies and of a sufficient amplitude, yes.
The vibration usually measured on the bearings of machine because bearings are often the place where damage occurs and where symptoms first develop. Vibration measurements are usually taken at machine bearings, with accelerometers mounted at or near the bearings.
There is a lot of damage to the vehicles such and physically people can have broken bones or wounds or even die.
Starting at 85 decibels, ear plugsshould be worn because hearing damage begins. At 140 decibels, no matter what the frequency or duration of time, serious damage is inflicted to the ears and it is extremely painful. At 145 decibels, vision begins to blur due to vibration. 163 decibels is the minimum glass breaking sound level.Go to this chart for a more detailed explanation.http://makeitlouder.com/Decibel%20Level%20Chart.txt
it does no damage at all.
No, only damage to the vehicle is covered.
loose couplingsmisaligned pumpsexcessive vibration
An Ipod should work safely with any sort of subwoofer setup.
Vibration , damage from sun exposure ,
If at the right frequencies and of a sufficient amplitude, yes.
If the soil conditions and the foundations are poor, then vibration from heavy traffic(like trucks) can actually eventually damage your house.
Yes, the vibration puts a severe strain on the steering and suspension parts.
Could be a number of reasons, rot, damage, vibration may have made it come loose.
to your lunges and brain cells physically. but also to your life.
Typically with the Mazda RX8 Rotary engine vibration at revs as high as 6000 is down to engine damage suffered when oil was low. Your engine requires rebuild or renewal. Vibration at idle only is typically engine mounts, a know fault many dealers are aware of.
Vibration of WHAT? The noise of the saw? The impact of the tree when it hit the ground? Etc? Unless the tree actually struck your residence, proving damage to your drywall is going to be difficult if not impossible.
Could be a few things, I would check universal joints first. Also check driveshaft for damage.