Of course it can fail. Look at the temperature of the water in the boiler, turn the stat up and down. You should hear a slight click when the temperature setting and the boiler water temp are appx the same if you do, the stat is probably good. You can verify this with a voltmeter.
Because you forgot to open the vent when the pressure dropped below 15 psig. A boiler under vacuum will suck in its handholes and manholes, and they might start leaking when pressure is put back on them. weakened boiler parts can fail as well.
yes it will handle the heat as long as your boiler is started with copper
For a while IF the boiler has an automatic low water cut off and other safety devices but if any fail you will have a melt down and an explosion
Boiler can be classified as below
In a boiler, pitting is dangerous because it weakens the boiler plate by reducing its thickness and strength. A pit that reduces the boiler plate thickness (at its weakest point) to 1/4 of the original thickness will fail at its Maximum Allowable Working Pressure. The weakest point is typically at the longitudinal joint (welded or riveted boilers) and pitting, grooving and cracking at this joint is closely monitored in all boilers.
Atmospheric Fluidized Bed Combustion Boiler (AFBC boiler) is a type of operational boiler. In a AFBC boiler a little more fluidized bed combustor is added than a conventional shell boiler.
what is boiler
A system or combi boiler is a great replacement for a Baxi back boiler. Boiler Hut can help with selection and installation.
A fish boiler is a hous boiler that stores fish instead of water.
There are a number of references to use to find boiler servicing. For example, Service Experts, Inferno Boiler, and Boiler all provide useful information about boiler servicing.
steam boiler
An IK on a boiler is a Soot Blow. It is mounted on the sidewall of a boiler furnace and cleans the internal boiler parts with high pressure.