0
That depends on 1) what indoor coil you have, 2) is the ductwork adequate to support 4 tons and 3) if the indoor coil and ductwork are suitable does the blower have the capacity to support 4 tons or 1600 cfm? If so it must be sped up.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What part of a ton equals 500?
500 lbs is 1/4 of a ton. (A ton is 2000 lbs.)
500 pounds equals how many tons?
500 lbs = 1/4 of a Ton.
How many pounds in 4 in a half ton?
(4.5 ton) x (2,000 pounds per ton) = 9,000 pounds
Is a dodge ram 1500 a half ton or 3 quarter ton?
a ram 1500 id only a 1/2 ton, a ram 2500 is a 3/4 ton and a ram 3500 is a 1 ton
What is one forth of a ton?
1/4 (0.25) of long ton (2240 lbs) in ounces = 0.25 * 2240 * 16 = 8960 ounces>1/4 (0.25) of short ton (2000 lbs) in ounces = 0.25 * 2000 * 16 = 8000 ounces
Your house is 2400 square feet and has a 4 ton air conditioner Can you replace the outside unit with a 5 ton or does the codenser coils have to be replaced also?
You have to replace the condenser too.You need a bigger condenser to discard the heat from your space that the bigger compressor sucks. Andreas Petrides from Cyprus
How much does a 4 ton ac unit weigh?
How much a 4 ton ac ruud condenser weigh
What tonnage is this lennox condenser unit model hs19-511u-3p?
4
Can a 4 ton indoor evaporation unit be matched to a 3 ton condenser unit to make it more efficient?
No. It will be less efficient.
Can you match a 3.5 ton air handler by Gibson 13 seer with a 4 ton 13 seer Rheem air handler?
You can't match an air handler to an air handler. I assume you meant a 3.5 Ton A/H to a 4 Ton condenser. The answer is no. If the A/H was 4 Ton & you had a 3.5 Ton condenser you could with an expansion valve setup. You should really match equipment when possible & I highly recommend using a qualified technician.
Can a 3.5 ton evaporator be used with a 4 ton condenser?
yes it can. you can you can only downsize a coil by .5 tons or up .the flowrator piston have to be be changed according the the condenser size don't ever try to go more than1/2 ton it would damage the system.
Can a 4 ton evaporator be used with a 3.5 ton condenser?
yes it can. you can you can only downsize a coil by .5 tons or up .the flowrator piston have to be be changed according the the condenser size don't ever try to go more than1/2 ton it would damage the system.
What size ac condenser unit is needed for 1500 sq ft house?
4 ton
Do you have to have a 4 ton coil for a 4 ton ac unit?
The rating is technically a minimum. You could use a larger coil and have it work. But if its a Evaporator coil it will need to be matched on the far end with a similar or larger condenser coil. If the Condenser coil is larger it will probably just take a little more refrigerant.
What is the Goodman air conditioner model number CKL49 1L tonage?
It is a 4 ton ten seer a/c condenser
What ton unit should you have inside if you have a 4 ton ac outside?
It depends on the cooling load for the home. air conditioners are sized and rated as a matched system consisting of the condenser and evaporator. The capacity of the system changes with the different evaporators. Usually you use either the same size as the condenser or 1/2 ton larger.
What size AC condencer will an American Standard coil model ccbc48a4acd0 handle?
usually you can go up to 5 ton condenser depend on the EXV on the air handler but i recommend 4 ton variable speed condenser if you need more information please check my site Breeze-Air.com or email me Breeze_ac@hotmail.com
