skin membrane vacuole nucleus
If your old epoxy is good then you can apply over it, but there are many facts to consider before applying over existing epoxy coating.
As long as none of the paint is flaking, you can.
The Sharpie will eventually wash off the epoxy. The only way to keep any drawn image on it is to sand it down and do it or possibly draw with your Sharpie and apply a couple coats of epoxy clear coat over it.
Two ways epoxy can be strong. 1 Chemically Epoxy is a class of substance acquire by polymerization from epoxides. Epoxies are used mainly in adhesives and coatings. 2 Physically(Physically: Physically epoxy coating systems contain two elements, resins and hardeners. The resin component is usually light, sometimes almost clear colored, and almost odor free) I like epoxy floor because it is durable and long-lasting.If you want to apply epoxy on your concrete contact your local epoxy installer.
It's called epoxy. You can apply it yourself or have a professional do it.
It certainly does work and is far easier to apply and maintain than fibreglass. Preferably choose a non solvent based epoxy with no voc's as this is also environment friendly.
Be certain that the surface dew / moisture has completely evaporated before applying.
Epoxy fits all your requirements. -Be sure the surface is degreased and dry when you apply it.
A mixture of epoxy resin thickened with as much Saltillo tile dust as possible, should be the consistency of peanut butter when ready to apply to the surface. Epoxy resin kits are available at marine or large hardware stores.
Epoxy resins are used with aggregate (silica sand) to produce epoxy mortar or epoxy concrete, which is used for structural repairs of concrete.
No, Seal-Krete Epoxy-Seal is an acrylic-epoxy blend. By mixing 2 unlike resins (patio paint and Epoxy-Seal) the hard Epoxy-Seal acrylic-epoxy resins would become weak resulting in a coating failure. No, Seal-Krete Epoxy-Seal is an acrylic-epoxy blend. By mixing 2 unlike resins (patio paint and Epoxy-Seal) the hard Epoxy-Seal acrylic-epoxy resins would become weak resulting in a coating failure.