0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you calculate the required pool filter backwash rate in gallons per minute and backwash volume in gallons?
how do i calculate the volumn of backwash in a pool
Do you shock a pool or backwash pool first?
Backwash first then shock. If you shock and then backwash you will be throwing away the shock you just put.
Can you put chemicals in the pool while the vacuum is in?
It is generally safe to add pool chemicals while the vacuum is operating as long as you follow the manufacturer's instructions for both the pool chemicals and the vacuum. However, it may be more effective to add chemicals when the vacuum is not running to allow the chemicals to distribute evenly throughout the water before the vacuum starts circulating.
Do you backwash your pool before you put chemicals in?
Yes, it is recommended to backwash your pool before adding chemicals to help ensure the pool water is clean and free of debris. Backwashing helps remove any built-up contaminants in the filter so that the chemicals can work more effectively in balancing the pool water chemistry.
When adding stabilizer to a salt water pool is the backwash running while pouring in the stabilizer?
When adding stabilizer to a pool you should not have a backwash valve open. Stabilizer should be added directly into the skimmer basket and you should open the skimmer all the way and close off the main drains for 24 hours.
When vacuming pool set at waste or backwash?
If the pool is really dirty then it is best to set the filter to waste.
When do you add DE to a pool?
You add D.E. to a pool when you do a fresh filter clean. You also add D.E. if you have to backwash your pool more than normal. When you backwash the pool it is also dumping the D.E. out so it needs to be replaced to keep the grids covered so the pool can filter properly. Hope it helped
My backwash pool valve will not fully close. Can pine needles get inside?
Mine did the same. The rubber gasket under the valve knob had become messed up. I unscrewed the valve and put the gasket back in place. My local pool place says this happens alot when you turn the valve from backwash to filter while the pump is running.
Why Pool won't backwash and creeper won't work?
Potatos dont fly when creepers go into the pool. Hope this helps
How do you know when you need new sand in a Hayward filter for an inground pool?
Depending on the size of the pool and the size of the filter and the amount of times you have to backwash, also if you have had a lot of rain then you may need to backwash more than usual. If you put the pool in and the filter and you know how old the sand is, if you are backwashing more than usual,change the sand. Also before you backwash check the pressure of the water going back into the pool, then backwash check the pressure again the pressure should for any size hayward pump push your hand away if it does not then change your sand.
What quantity of water is wasted during a swimming pool filter backwash?
29 gallons
How do you backwash by cleaning a pool without a pump?
You can set up a siphon hose if your pool is on a hill, otherwise, buy a pump. Hatawa
