Yes but extra work. Especially if it has the new sensors.
If you are referring to the tire pressure sensor, the answer is yes. One sensor is located inside each wheel. Actually when you look at the valve stem, that stem is part of the sensor. You must remove the tire from the wheel to replace the sensor. Extreme care must be used when installing a tire on a wheel with a tire pressure sensor. They are very easily damaged. If you suspect is is bad, I suggest you visit you local GM dealer. They have a tool that can scan the sensor and detect if it is good or bad without removing it.
the bead of the tire needs to be broken, the valve stem is fitted from the inside out. take the tire off then cut the vavle stem off from the inside and to put the new one on u got to put the stem tho the inside of the tire and pull tell it pops into place
remove tire. remove bottom mount. pullout through bottom.
You can change a flat tire on a Ford Taurus Wagon by first removing the lug nuts, pulling it off, and replacing with the spare tire.
Attached to the valve stem inside the tire/wheel.Attached to the valve stem inside the tire/wheel.
You must remove the wheel/tire in order to remove the front strut.
if their the same tire size then yes
If you mean removing the tire/wheel assembly from the vehicle, you jack it up and use a lug wrench. If you mean removing the tire from the wheel, this is difficult to do without the specialized equipment of a tire shop and probably isn't worth trying, considering that tire shops will typically do it for two dollars or so.
Try raising the car and removing the lug nuts for starters...
Tire pressure sensor in mounted inside the tire at the valve stem. The valve stem is part of the sensor.
The tire pressure monitor system will no longer function.
Tire pressure gauges are simple to use. Just take the valve stem off the tire and insert the gauge end into the stem fully. You will then get your accurate tire pressure reading. Just replace the valve stem and you're done.