Want this question answered?
Change oil pump 2003 Gmc Envoy
To replace the driver's side mirror on the 2003 GMC Envoy, first remove the interior door panel. Then, remove the mirror connection cover inside the panel as well. Unscrew the screws holding the mirror to the door. Remove the wiring and replace the mirror with a new mirror. Replace the screws and place the door panel back onto the door.
The 2003 GMC Envoy brake light lamp is a 3157. See sources and related links below for more information on bulbs.
easy,push in the mirror button on the left,and hold it for about 10 seconds or so until the you see the letters cal light up , drive in a cicle for a few minutes and it will re-calabrate inself
Tail light assembly short
every 50,000 miles
The airbag light in the 2003 GMC ENVOY can be reset by disconnecting the battery for about 5 minutes. Then reconnect the battery, turn the key to on without starting the vehicle, and pump the gas pedal three times if the light is still on after reconnecting the battery.
Just had to do this on my own envoy......You reach under the rear bumber and the light assembly simply unscrews from the housing. You replace the bulb and screw it back in. Takes 5 minutes.
At 100,000 miles or 160,000 kilometres you change the spark plugs. www.trailvoy.com All the answers for your Envoy/Trailblazer from true enthusiasts!
On a 2002 Envoy you turn the key to run but don't start it. Then push and release the gas pedal 3 times within 5 seconds. The change engine oil light should blink for 5 seconds meaning you have reset the system. If it doesn't blink for you do the procedure again. I'm pretty sure its the same on a 2003. Good luck.
how many gallons of gass will a 2003 GMC Envoy hold
how do i change a parking light bulb on a 2003 hyunadi accent