you can buy a rf converter from radio shack or if you have a vcr you can run the rca cables to th e input on the vcr and output with coax.(make sure you turn the channel on the vcr to the video input channel
From top of fuel tank connect hose to top carburetor connection> Larger pipe. from bottom of carb [smaller outlet pipe connect hose to primer pump in. From out of primer pump connect to return hose to lower tank connection.
Ring connection ensures continuety in supply
It depends on what you are wanting to connect the iPod to. If you want to connect it to a wall outlet to charge, then you have to by an iPod wall adapter (includes adapter and iPod to USB connection wire). If you want to connect it to a computer to download music, photos, videos, etc., then you just use the iPod to USB connection wire that should already be provided when you buy your iPod, and connect it to any USB 2.0 port on your computer.
You don't.
You don't, you need a three wire to correctly make the connection.
Both the source and the TV have to have a HDMI connector. If they don't, use the S-connector. No S- connector? you will have to use the VIDEO connection on the TV.
No. It requires a computer (Windows, Mac), an internet connection, and a landline phone. Recently, you can connect the MagicJack to a wall outlet (no computer needed).
If there is a black wire going from the outlet to the switch and the other side of the switch goes back to the outlet then just cut these wires and connect supply wire directly to outlet. If the supply goes to the switch first, disconnect from switch and connect the two wires with a wire-nut. Some situations only switch one of the two outlets in a duplex device. Do the same thing, but also replace the outlet since the strapping between both outlets has been removed.
Grounding an electrical or electronics device commonly refers connecting it's power inlet ground pin to the ground connection of the power outlet. The power outlet ground connects to the ground connection provided by the electricity utility company or the building's common ground connection. The grounding essentially provides a zero volt reference. Many systems which have a metal chassis provide specific grounding points with screws/nuts to connect grounding wire. To ground chassis of a computer one need to connect ground wire to the metal case.
Install the GFCI outlet is a location near the hot tub where it can be accessed and tub plugged in. Connect ground wire to green ground screw. Connect black/white wires to LINE side of outlet. Black goes to copper screw, white goes to silver screw. You connect the wires by inserting them into the holes marked LINE and then tightening the screws down tight.
You can't. HDMI is digital. RCA is analog (component or composite).
Could be a loose connection somewhere, or a bad switch, or a bad outlet.