0
What else can I help you with?
Can you connect a VCR using a biaxial cable?
yes
What is the best way to connect my TV to the cable outlet using a TV coax cable?
To connect your TV to the cable outlet using a TV coax cable, simply plug one end of the coax cable into the cable outlet on the wall and the other end into the "Cable In" or "RF In" port on your TV. Make sure the TV is set to the correct input source (usually "Cable" or "Antenna") to receive the cable signal.
Can I connect Wii to TV using USB cable?
Your best bet is to buy an HDTV (if you haven't already) and then buy an HDMI cable, and also a component cable hookup for you in able to connect your Wii using the HDMI cable. Otherwise, USB cable won't do.
When using a cable modem to connect to the internet the data transmission share cabling with what other technology?
Cable TV
How can you connect a Nexus 7 to a TV?
To connect a nexus 7 to a TV you need a slimport in order to connect it to an HDMI cable
How you can watch cable connection television using monitor without CPU?
Get a monitor with an HDMI or analog input and connect it to a cable TV tuner.
Can a Linksys cable dsl router connect the Internet to a cable box and TV?
Yes, a Linksys cable DSL router can connect to a cable box and TV, but it typically requires a specific setup. The router connects to the internet via a DSL or cable modem, and then you can connect the cable box to the router using an Ethernet cable if the box supports it. However, most cable boxes connect directly to the cable outlet, while the TV can connect to the router for streaming services. For optimal performance, ensure your devices are configured correctly, and check compatibility.
What are the different ways to connect a video source to a TV using a SCART cable?
To connect a video source to a TV using a SCART cable, you can simply plug one end of the SCART cable into the SCART socket on the video source, and the other end into the SCART socket on the TV. Make sure both devices are turned off before connecting the cable to avoid any damage.
When using a cable modem to connect to the internetthe data transmission shares the cabling with what other technology?
TV
How do you connect sinotec DVD player to LG television?
Very very easy. does your DVD Player ( Home theatre ) have a HDMI cable? If it does, you can just buy an HDMi cable and connect it to Hdmi 1 on your tv and the other end to the Dvd Player and the sound a video will be very crisp. Alternatively, you can use an AV cable ( cable with yellow plugs on the end) and connect it to an AV output on your tv and DVD player. If you are using only the tv's sound this will work, but if you are using a amp,etc. you can connect 2 RCA cables to the tv and the amp for the sound.
You have cable box DVD wsurround sound all connected to tv you want to add the vcr to this and be able to tape from cable what is the best way to connect the vcr in with the rest should you run coax?
You unhook the connection from the cable box to the TV and connect it to the VCR input. You purchase a short cable and install it from the VCR output to where the cable was connected to the TV. The TV will get the cable box signal through the VCR with no problem when you are not using the VCR. If the cable box was connected to the surround sound or Home Theater and then the TV then connect the cable box to the VCR and then the surround sound or home theater.
Your TVs cable connector broke is there anyway to hook up cable to your tv using rca jacks from the cable box to the tv?
If your TV has rca input jacks for video games, etc. then all you need is to connect to the output rca connection on the cable box and you are good. Just remember that you won't have to tune the TV to get the channels. You will have to use A/V mode all the time to watch your favorite shows.
