0
no
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Starting from an HDTV cable box using a split cable going to the pip output can you connect another tv to the pip output and get an HDTV picture on the other tv?
Hi, It really depends on your PIP output on the cable box and whether or not the output is HDTV or standard TV. And in some cases, the PIP output will only display non-HDTV channels, depending again, on the box and the cable company. However, IF the cable company says that a HDTV signal is available from the PIP output on the cable box, then it'll probably work. The only way to be sure is to connect a TV and find out. Hope this helps, Cubby
What device is used to convert digital signal to non-digital television set?
If you mean a set top digital box, then you can connect that to any tv.... otherwise..... It doesnt work that way. The digital signal is a part of the analog signal. Just screw the cable wire on to the back of your tv.
How do you connect your Laptop to the Audio Video slots on an older non HD TV?
You would need a red, yellow, white audio video cable.
Can you use an HD cable box with a non-HD TV?
This depends on the cable box. Most HD cable receivers have not only an HDMI output for use with HD televisions but also feature analog connections that can be used with non HD televisions. The analog outputs will only deliver SD quality so the benefits of an HD receiver won't be seen, but the receiver most certainly can be used and will display HD quality whenever an HD television is connected to it.
Can you buy your own box to receive the HD TV signal if you have just purchased a HD TV and have not signed up for HD TV service from your cable company yet?
Please note that you don't have to have HD TV service to play HD TV games, but you do to watch high definition television. If your TV is an "HDTV" (as opposed to a "HD ready TV"), then the Radio Shack box isn't going to do you any good. There are two ways that you might be able to get HDTV programing without buying HD cable service. Your HDTV should have a digtial over the air tuner (ATSC in the US). If you are located in an area were you can get TV reception with an antenna, then just hook up a TV antenna to your HDTV and tune into a HDTV broadcast. Some cable systems include non-premium digial channels in a format called QAM. Most HDTVs have a QAM tuner built into them. Just connect your HDTV directly to your cable outlet (not through a converter box) and scan for digital cable channels.
How do you connect Dish TV to Braviva FullHD?
You can connect your DISH receiver to your Bravia TV using one of 4 methods: Coax cable connected to your coax port (non HD receiver) RCA (composite cable) - yellow, white, and red tips Component cable/ audio cable - Green, blue, red, white, and red (white and red for audio), HD receiver or HDMI cable (HD receiver). The component and HDMI give the highest video and audio quality. To receive HD programming, you need an HD receiver and HD programming package.
A way to hook up basic cable by yourself?
For cable internet, you typically must connect the modem to the cable line, and then any devices that will be connected up. Software is NOT necessary for today's cable modems to be utilizeable on modern OSs and computers. However if you mean cable TV, or cable internet *service*, you may not be able to do this without either working with the cable box (which is illegal without explicit permission). Some are also 'turned off' at the hub, so cannot be activated without being switched on by the cable provider. Most digital cable TV and Internet work this way. So if you're asking to steal cable, you almost can't. If you're trying to save money on an installation, it may be possible, but cable companies will often also make this a non-option.
Do you need a high definition TV if you have digital cable?
Using HD TVSome satellite and cable networks do broadcast 720p HD, at this stage there are no full 1080 HD broadcasts. You need to live in an area where this service is provded and you'll need to pay a subscription fee and you will need a digital receiver with an HDMI output to your TV. Also, you can watch analog or non-HD digital programing on a HDTV. To enjoy the better resolution that HD offers, you need to get HD signals from somewere: Free HD broadcasts with an antenna, HD cable, HD satellite, HD/BluRay DVDs...
Do I need anything special to have cable on my non-digital tv?
No. If your TV has cable service then it doesn't matter whether or not your TV is digital. If you're trying to pick up channels with an antenna though, you'll need a digital converter box. fuld fol envivo ECUADOR BER SU BENESUELA
Companies that offer non-satellite cable TV in Arlington, TX?
I live in Arlington, TX. What companies offer cable TV service that aren't satellite?
How do you connect an apple MacBook Pro to a non- HD sony tv?
Yes, simply purchase the suitable video adaptors for your MacBook Pro and television. If you have a MacBook Pro from 2009 or later, you'll need a Mini DisplayPort to VGA adaptor. This can be purchased from the Apple Store and Authorised Resellers. You will also need a VGA cable to connect the adaptor to your television. If your television uses DVI instead of VGA, you'll need a VGA to DVI adaptor.
What equipment do you need to watch basic non-cable channels on TV?
A tv and a satallite that you can hook up to the tv
