To be honset, you would spend more money trying to rebuild a radio and making it digital than you would just going out and buying one, and having it installed.
Stereo transmitters work with your FM radio station to broadcast MP3 or digital recorder files through your stereo. You need a stereo transmitter to pick up the sound data and broadcast through the radio.
A marine stereo radio is similar to a normal radio, while a marine band radio is like a walkie talkie. ALso marine stereo radios have a larger range. check it out at http://www.buymarineelectronics.com/
An XM radio is no more difficult to install than a normal car stereo.
Although it is not required in most situations, most people prefer to have a stereo that meets certain basic requirements such as CD, digital and satellite radio, and auxilliary input.
This is a transmitter that works in conjunction with your car stereo to broadcast content from your mp3 player over your radio using FM radio waves. This can also work with some digital recorders.
Clock radios can come in many varied types. It is not necessary for every clock radio to come equipped with stereo. If so desired, you can also get an AM/FM stereo with a clock radio
what settings on my digital radio will trasmit bbc radio 6
Currently radio shack offers several wireless stereo transmitters. If you go to their website radioshack.com and search "wireless stereo transmitter" you will get several results.
No. Not only is it illegal to amplify a CB radio beyond the FCC permitted four watts, but stereo amplifiers and linear amplifiers work in very different ways.
Begin by removing the decorative stereo retaining cover from your 1999 Ford F2 50 pickup truck stereo. Remove the stereo retaining screws. The stereo will slide out. Remove the wiring harness and the antenna cable from the back of the stereo.
I have a 1985 Nissan maxima....fully loaded. automatic, power everything. the stereo is equipped with an automatic volume control sensor that can be disabled (there is a knob or button on the stereo), but it automatically adjusts the volume of the stereo/radio when it detects noise from wind, ground, etc. This is a normal feature of the car. Hope this helps.
To enter a stereo code on a 2006 Acura, first turn on the ignition and the radio. If the radio displays "CODE," use the preset buttons (1-6) to input the code. Press the appropriate button for each digit of the code, and then press the "AM/FM" or "Enter" button to confirm. If the code is correct, the radio will unlock and resume normal operation.