Yes, you can and you definitely should -- "HID kits" are widely available, but they are (all) illegal and unsafe. It's easy: simply remove the "HID kit" bulbs from the headlamps, follow their wires back to the ballasts and remove those. The vehicle's original headlamp wires will be connected to the ballast. Purchase the correct halogen bulbs for your car, install them in the headlamps, connect the car's original headlamp wires to the bulbs, and make sure the headlamps are aimed correctly.
Remove the wiring harness from the back of the headlights. Remove the headlight retaining bolts. Remove the headlight. Reverse the process to install the new headlight.
Begin by removing the wiring harness from the back of your headlight assembly. Remove the headlight assembly retaining bolts. Reverse the process to install your new LHD headlights.
Begin by removing the wiring connector on the back of the headlight. Remove the headlight retaining bolts. The headlight will come out.
You will have to take the bolts off the old headlights and simply replace the old headlight and screw the bolts back in.
Turn the headlights on the whole way, then push the headlight knob back in, leaving the parking lights still lit. This will hold the headlights up, without having them turned on.
Unlug the light harness, unscrew the plastic nuts, pull out the headlight. Reinstall new headlight, screw the plastic nuts back on and plug the light harness back into the the headlight housing.
Remove the wiring harness from the back of your 1997 Chevrolet Z71 headlights. Remove the headlight retaining bolts. The headlights will come out. Reverse the process to install the new headlights.
Tske out the old ones by removing the screws. Unplug the headlight. Plug in the new headlight. Put it all back together.
The headlights of a 2001 Dodge Caravan are aimed by turning the adjustment screws on the back of the headlight assembly. They allow for vertical and horizontal adjustments.
There are two clips on the back side of each headlight that you lift vertically. Once the clips are removed the headlights come right out.
Remove the wiring harness from the back of your 2003 VW Jetta. Remove the headlight assembly retaining bolts. The headlights will come out. Reverse the process to install your new headlights.
Go behind the headlight under the hood and turn the light bulb out,there is a clip holding it in place, snapped out of it,put the new one in get the clip back on it and turn it back in the headlight house