Want this question answered?
Micro strip lines,Parallel strip lines,Coplanar strip lines,Shilded strip lines.
The Strongest Screwdriver: Torx Pro.---In improving the standard Torx, they identified that it had sharp edges, which meant that the very tips of the "star" shape of the Torx screwdriver were ultra-thin (of course, since it comes to a point, like the top of a triangle.) So, Torx Pro made the edges of the star rounded, and it has become the strongest screwdriver made.---------Some of the strongest screw drive shapes -- in no particular order -- are:hexagonal socket (Allen)square socket (Roberts)"hexalobular" socket (Torx, TTAP)external hexagonalexternal squareSome particularly weak screw drive shapes are:flat slotted (?)cross (Phillips, Frearson)spanner head, dual pin (?)The weak shapes are all too easy to strip the screw head or damage the driver or both.Yes, but which one is the strongest? Well I'll give my vote to TORX (hexagonal star) or the somewhat similar TTAP
It consists of dielctric substrate with a strip conductor on one side and complete conducting layer on the other. It is basically an open structure and requires high dielectric constant substrate to confine the fields near the strip conductor
A bimetallic strip is made of two different metals joined firmly together as the strip is heated one metal expands more then the other the strip is forced to coil more tightly when the strips cools the process rapidly and uncoils again , movements of the strip can operate an electrical switches
Measure the mass (in kilograms) and length (in metres) of the strip. Divide the first by the other.
Replace the head or redrill the hole and retap it for a bigger screw.
Strip Mining is the practice of mining a seam of mineral, by first removing a long strip of overlying soil and rock.
Take a hook like a command strip, screw it, tape it, or somehow atatch it to the ceiling, then peel tiny strip of the banana and screw the it through the hook
Removing the nicotine strip from the the black & mild.
strip mining
You don't. It would be like removing growth rings from a tree.
The security thread was first used in the Series 1990 notes
It depends on the type of material that the screw in made of. Also the threads in softer materials such as brass will 'strip' if over tightened.
You may have a worn screw tip or driver. Predrill your holes, use hand soap from a pump dispenser to help the screw go in easier. Make sure you have a # 2 bit if your screw is a #2...
....... to get to the same side!Explanation; one of the many answers to the joke "Why did the chicken cross the road?" is "to get to the other side." A Mobius strip is a figure that has only one side, hence the change in the answer.
The best thing to do is to not drill the screw heads to far down, since it will have a tendency to strip the screw heads, you should also consider making sure you item is prefectly mounted due to the problems of the screw.
After you have the seed beed strip, place it where you want it to go, then you can use cotton beading thread to sew it onto the leather peice. you can also use cotton clasps to hold the cotton in plae, but if i doesn't have 2 be fncy, you can just use tiger tail to thread up the centre of the leather, then tie it of ono that with crimps.