Yes, you can drop the transmission from a 2009 Chevrolet Impala without removing the flywheel. The transmission can be unbolted and lowered separately, as the flywheel is part of the engine assembly and does not need to be disturbed for a transmission removal. However, ensure that all necessary components, such as the driveshaft and electrical connections, are disconnected before proceeding with the removal. Always refer to a repair manual for specific procedures and safety precautions.
Provided you have a lift and a transmission jack the time will be about 5 1/2 hours.
yes
If you mean lifting the engine as in removing the engine for repairs, the answer is no. You can support the transmission with a jack or blocks and remove the bolts holding the transmission and engine together. It usually is much more difficult to remove both components at the same time, due to the extra weight and trying to balance them without having to raise everything to an unsafe height. make sure you unbolt the torque converter from the flywheel. makes it that much more easier
how much to replace the transmission line in 2006 Chevy impala
it weights about 750 lbs without the transmission
how do you check transmission leval on a 03 Chevy impala
No, the pump can be changed without dropping or removing the engine.
2001 impala transmission service how often
Do a 02 grand am transmission fit in a 03 impala
How many quart of transmission fluid is requier for a Chevy impala 2007
TRANSMISSION LINE LOSSES
yes , but pressure sensor from older transmission needs to be install in newer one