yes you get metal coat from an old guy in pewter city in kanto after you have defeated the elite four Good luck ! yes you get metal coat from an old guy in pewter city in kanto after you have defeated the elite four Good luck !
When you are about to exit the S.S. Aqua for the first time, a man will give you the metal coat.You can get one in Kanto, but it's not worth the wait... you should just trade it from Sinnoh. A metal coat lets you evolve a Scyther through trade. I have a Scizor now :D
easy go to the shops
Rain coat and boots
well you see that you can buy from Kelcon rug or find it in a dungeon because you see i have time too.
Unless I wanted to be late, it was time to get to my aqua aerobics class.
Onix does not evolve at any level. If traded while holding a Metal Coat in Pokemon Gold or later, it will evolve into Steelix.You can't evolve an Onix by leve.l You have to let Onix hold Metal Coat and trade it, then it will evolve into Steelix.
aqua marine is a type of stone, last time i checked stones don't get paid.
It's splash plate ...Talk to the s.s aqua captain for the third time and he gives it to you...
You do not normally need to sand it, unless it's quite rough.
the metal.
when you coat a metal in another metal you are protecting the inside metal. The metal metal that is being used as a coat must be more corrosive than the 1st metal. For example iron can be coated in zinc because zinc is more corrosive than iron. This is common on a ship, the iron hull is coated with blocks of zinc which will act as a barrier and will corrode instead of the iron. The zinc blocks must be renewed after a period of time however. Other ways of stopping metals from corroding include, chromium plating, coating in paint, oil or plastic.
theres no sanding when u do a 2 stage paint job,and ull have to wait about 2weeks tobuff the car if it was not baked under heat lamps u only bake if enamel modern paint does not require bake next question asked how long to wait after last clear coat before you color PAY ATTENTION the color coat goes on before the clear coat the clear coat is to protect and fill in any bumps in paint such as metal flake paint bottom line if you clear coat first ,you are wasting your money an your time you do not sand between color coat and clear coat sanding will take away the proper effect clear coat is to finish paint properly