0
Not recommmnded. Very easy to overload a circuit that way. While it would normally just trip the breaker, that relies on the breaker being functional.. if it isn't, you're looking at a fire.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Can you plug 2 full size fridges into one wall socket or into a power bar for safety?
No, full size refrigerators require a dedicated minimum 15 or 20 amp outlet.
Leave a cell phone charging in a wall socket?
yeah but don't leave it for like a full day . i'm always on my phone and what i do is when its on like 2 bars what i'd do is that night leave it on charge for the night but unplug it when i get up straight away and i charge it in a wall socket there's nothing wrong with that and i need my phone to always be charged up because im texting people every single 10/ 5 mins and even less when they text me back and i'm never saw without my phone not even 4 1 moment
If you have a socket that is 36mm what is that in regular socket?
There isn't a standard socket which matches up exactly. 1-15/32 or 1-1/2 inch MIGHT work for a six point socket.
I am replacing a old table lamp socket the lamp with a base night light. There are 4 wires 1 back 1 white 2 brown 4 wires total. There are 3 terminals on the socket. Where do the wires go?
If you socket is the same as the one I am trying to replace then you only use 2 wires. 1 black, 1 white (power coming in) and the the night light is attached with the white and the other wire comes from one of the terminals from the socket. The switch is similar to the 3-way switch, 1 for the light in the socket, 1 for the night light..and 1 turns both on. No, mine is different. I have to use four wires. I took mine to the local hardware store where a friend showed me how to rewire it. I then went home and rewired the other one sucessfully. Thanks for the info.
How do you wire one light socket to another light socket?
See Discuss Question below.For more information see the answer to the Related questions and also the Related link shown below. As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed. Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized. IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
Can you plug 2 full size fridges into one wall socket or into a power bar for safety?
No, full size refrigerators require a dedicated minimum 15 or 20 amp outlet.
How many rebars you need to purchase for a 100 ft wall When the bars are placed 2' - 0 on center and horizontal?
That would depend on the height of the wall...
What CPU should you use for socket 775 motherboard?
Depends on how much power you need. You use a Socket 775 processor for a socket 775 motherboard. Core 2 Quad @2.66Ghz, $169.99 Pentium Dual-Core @2.93Ghz, $79.99 The more power, the bigger the price.
What is the difference between a single gang socket and a double gang socket?
For countries in Europe and other world areas running a 50 Hz supply service.A double gang wall socket has two outlets so you can plug two appliances into it.A single gang wall socket has only one outlet, so you can plug just one appliance into it.Note: You can plug a two-way adaptor into any socket outlet but this is only safe to do if the appliances you want to use take very little power. Such things as table lamps, a television and a hi-fi, a PC and a printer, etc. are all low-power appliances so they can be used safely with a two-way adaptor.If you need to use more than two low-power appliances in a room that only has a single gang or a double gang wall socket then, for safety, you must use a multi-way socket panel. Such a multi-way panel has a cable with a plug so it can be plugged into any wall socket outlet.Such multi-way panels are available from hardware stores and usually have between 2 and 8 socket outlets on them. Such a multi-way socket panel should always include a fuse to prevent all the appliances plugged in to it from overloading the wall socket.For USA, Canada and other countries running a 60 Hz supply service.Generally speaking when you say single gang or double gang, a single gang is two sockets and a double gang is wider and accomodates four sockets. You wouldn't normally say single gang socket. You would say single gang box or single gang face plate. which would be two sockets not one.
Can you overcharge a MP3 battery?
Apparently so. I left my cheap Sylvania MP3 device charging for an hour or so, when it had only 2 bars of power left on the gauge. After continued use throughout the week, the device repeatedly died quickly from 3 bars (full power) to 2 bars within 3 minutes of playing music (with headphones).
Leave a cell phone charging in a wall socket?
yeah but don't leave it for like a full day . i'm always on my phone and what i do is when its on like 2 bars what i'd do is that night leave it on charge for the night but unplug it when i get up straight away and i charge it in a wall socket there's nothing wrong with that and i need my phone to always be charged up because im texting people every single 10/ 5 mins and even less when they text me back and i'm never saw without my phone not even 4 1 moment
Jenna has 3 bars Tena has 2 bars how many bars in all?
3 + 2 = 5
What tools do are needed to remove the starter on a 1985 ford crown Victoria LTD?
a ratchet, 3/8" socket (for the power cable), and either 1/2" or 5/8" socket for the 2 bolts that hold the starter in place.
On playstation 2 power rangers super legends how to you climb up the Hugh wall?
if its with a extra wall that means you wall jump if its with the three buttons i dont know
What is a 1-2 drive breaker bar?
This might mean a 1/2 inch socket wrench with a really long handle - the longer the handle, the greater the power to loosen tough bolts, or tighten critical nuts/bolts like the axle retainer nut (175-225 foot ft lbs).If you don't have a socket wrench with a long handle, you can achieve the same 'power' by putting a piece of pipe over the end of the wrench handle.A spare piece of 1/2" or 3/4" galvanized plumbing pipe works great. Electrical conduit doesn't have the same wall thickness and might tend to bend - but will do in pinch.
No power to wipers on Chevy Astro?
bad solder grounds on box on fire wall where wipers are powered did 2 of them
What the socket size on front axel 1997 F-250 4x4?
its a specialty socket you can buy from napa for about 25 bucks. i believe its like a 2 1/2 or 2 3/4 inch socket
