0
Can you install a fan speed control switch with 2 back and 1 green wire to a 3-way circuit that has 1 black 1 white 1 green and 1 red wire If yes what does the red wire connect with?
Wiki User
∙ 10y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Will a circuit work with the switch and will it work if you take the switch out of the circuit?
A switch is used to connect or disconnect a load from a source of voltage. If you take the input and connect directly to the output the result is that the connected device is always on.
What could you add to the circuit to control the bulb?
Switch
What is positive current control circuit?
this is a circuit in which the switch is located before the load in the circuit
How do you connect an ON-OFF switch to control the light?
To control a light with a switch, the switch has to be connected in series with the light fixture.
What is the control device for a simple circuit?
Switch
How does a switch control the flow of electricity?
When the switch is open, the circuit is not a complete circuit. Electricity needs a complete circuit of conductive material. The switch breaks the circuit causing the flow of electricity to be disrupted. When you close the switch, a full circuit is restored thus restoring the flow of electricity.
What are the components of a flashlight circuit?
Battery, bulb, switch and conductors that connect everything together.
In a circuit the purpose of a switch is to?
In a circuit, the purpose of a switch is to control the current flow to the load by opening the circuit (off) or closing the circuit (on). When the circuit is open, the is no complete loop through which the current can flow. When the switch closes the circuit, it restores the loop, and thus allows the current to flow.
How do you connect a taxi radio because its goin off every time i start the car up?
To keep a radio of any kind from dropping memory you'll need to connect the clock circuit to a wire that is hot (energized) at all times. I you have a two way radio you'd need to connect it to a hot circuit, but i'd install a switch to shut it off when you arent in the car.
Do you need a switch to control each load in a parallel circuit?
Yes.
What are the devices that control the flow of electricity by breaking or completing a circuit?
a switch
What is the procedure to connect 2 limit switch in parallel in one circuit?
http://www.kpsec.freeuk.com/seriespa.htm
