Want this question answered?
The majority would plug into a standard outlet (120), however others may require a 240 outlet. You will need to check with the individual scooter to ensure you have the proper outlet to charge it.
If it does not come with a plug on it, no. If it is made for direct wire, then 99.9% chance is that it is a 240 volt unit. If you plug it into a 120 volt outlet your water will barely get warm.
Answer for USA, Canada and countries running a 60 Hertz supply service.Need to know the voltage of the outlet plug. On a 120 volts outlet there is one hot terminal and on a 240 volt outlet there are two hot terminals.
Only if it is rated for 110V-220V. If it is rated for 110V only and you plug it into a 220V outlet, your device will be destroyed.
If it is a 30 amp breaker then it is a 240 volt outlet.
On a 240 volt outlet, such as a dryer outlet: G is Ground, W is Neutral, X and Y are the two Hot legs.
Yes, the adaptor can take anything from 100 to 240 v.
Check the nameplate on the welder, if the voltage that runs the welder is 240 volts then the two black wires connect to a 240 volt supply and the green wire connects to the ground of the supply.
375
Different plugs are designed so that you can't plug an appliance into the wrong voltage. A dryer is usually 220-240 Volts and your standard outlet is 110-120 Volts. You can't do what you suggest.
On a 240 volt outlet, such as a dryer outlet: G is Ground, W is Neutral, X and Y are the two Hot legs.
This is a special purpose outlet, likely for a dryer. Normally in a house electric panel you have 120 VAC as the normal and 220 or 240 as a higher voltage. The 30 A is for 30 Amps. You can only plug in an appliance that has those ratings. You can't plug in a 120 V device.