if it has a wire size of #14 or #12 wire in it and it not really long (less then 20-50 feet) then you should have a problem just make sure your outlet is grounded and be sure to check and make sure your extension cord is not fryed or split a simple check or a simple $25 for a new one can save you a lot of grief later on
Answer for USA, Canada and countries running a 60 Hertz supply service.If the voltage is 120 volts at 1500 watts then the current is 12.5 amps (A = W/V). The term "heavy duty extension cord" has no meaning unless a wire size, voltage rating and insulation temperature factor is mentioned. An extension cord with #12 wire in it will work fine. Try and keep the cord as short as possible so as cord heating does not become a problem.
The density of the foils is the same. They are both pure aluminum, and they each have the same weight per unit volume (density). But the thicker "heavy duty" foil will weigh more for a given area of foil removed from a roll. This makes sense because the heavy duty foil is thicher, and something like, say, as square foot of this heavy duty foil will outweigh a square foot of "regular" foil.
four cycle dryer
heavy duty springs that keep the building balanced
yes, they are whats called a light duty 2500, their pretty much a 1500 series that came standard with all the heavy duty suspension peices all of which were optional on the 1500. yes, they are whats called a light duty 2500, their pretty much a 1500 series that came standard with all the heavy duty suspension peices all of which were optional on the 1500.
How do i unlock an GE heavy duty washer mashine after
Oster makes heavy duty blenders for a commercial kitchen. Cuisenart is a cheaper alternative to Oster if you are looking to save money.
Mounted on the bottom of the washer fluid reservoir.
Yes. It should be a 'heavy-duty' extension cord, rated for 15A or 20A .
Seems that maids were plentiful. One for every duty in the kitchen. Dairy, pastry making, cook assistant. runner, washer up, usualyl called skullery made.
The one I own is light duty. The one I drive for work is heavy duty.
Janome 11558 Heavy-duty Sewing Machine has some heavy duty needles.
This is really a heavy duty application and you are going to have to go to your main panel. I suggest a 50A GFCI breaker. It would likely run to a heavy duty outdoor outlet with a possible disconnect. This will require 6 AWG copper wire. You could likely get by with 40A breaker and 8 AWG, but of concern is the surges that happen when operating a pressure washer.
I'm at a hotel now. I'm using a whirlpool heavy duty commercial washer. It took 30 mins on the dot for the (large/high/coldcold) load. Hope this helps
Consider your washing habits. Tub size is important in large families. Heavy duty is needed for washing heavy loads. Top load and front loa are available. Space is also a factor.
Freightliner, Kensworth, Peterbilt and Sterling sell heavy duty trucks. Chevy Silverado and Dodge Ram are heavy duty pick-ups. A new heavy duty truck can cost up to $150,000.
Answer for USA, Canada and countries running a 60 Hertz supply service.If the voltage is 120 volts at 1500 watts then the current is 12.5 amps (A = W/V). The term "heavy duty extension cord" has no meaning unless a wire size, voltage rating and insulation temperature factor is mentioned. An extension cord with #12 wire in it will work fine. Try and keep the cord as short as possible so as cord heating does not become a problem.