answersLogoWhite

0

No, it is against the National Electrical Code to wire a receptacle with the wrong voltage. You should call a qualified electrician to change the 250V receptacle to a 125V receptacle.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do i change clock time on golf mark 4?

Twist black switch under speedo left and hold for hours, twist right and hold for minutes


How do you change a key switch on a 1988 ford bronco?

to take the key switch out you need to press the little pin sized rod located on the bottom of the switch. once pushed in twist the switch out.


How do I properly connect two black wires on a light switch?

To properly connect two black wires on a light switch, you should twist the exposed ends of the wires together and secure them with a wire nut. Then, attach the twisted wires to the black screw terminal on the light switch and tighten the screw to secure the connection. Make sure the wires are properly insulated and the switch is turned off before making the connection.


How do you change the driver side window switch for an '89?

I changed the doors on my 89 caprice.To change the electric switch you have to pull most of the interior panel loose from the door to get at the back of the switch .there was a blue knob on the back of the switch and I had to twist/pull this off and then pull the plug off of the switch.hope this helps.


How do you change change the window switch in a 2003 Venture?

Slip something thin (putty knife) between the switch plate and the door panel. Slowly twist and pry up while tugging up on the switch assembly and it will pop out. Don't use a screwdriver and just twist, you could crack the switch plate. There's enough wire to pull out the switch a few inches. Disconnect the connectors (small screwdriver to depress the catch) and the switch is out. No screws and no need to remove the door panel, it's just popped in!


Your dashlights are very dim when headlights are on but there is no brighten switch.?

Twist the headlight switch.


How do you properly use a bike twist shifter to change gears while riding?

To properly use a bike twist shifter to change gears while riding, grip the handlebar firmly with one hand and twist the shifter in the direction indicated to shift to a higher or lower gear. Make sure to adjust your pedaling speed to match the new gear for smooth shifting. Practice shifting while riding in a safe and controlled environment to become comfortable with the process.


How do you change a brake light switch on a 2000 Daewoo leganza?

it goes under the brake pedal, it should twist out , it has two tabs on it , only about a half turn


Was Oliver Twist crippled?

Because he was born in the workhouse and was not looked after properly, the little Oliver Twist was undernourished, but he was not crippled.


How do you change a stuck fluorescent light?

Make sure the light switch is turned off before attempting to change the fluorescent light. Wear gloves to protect your hands while handling the light bulb. Twist the bulb counterclockwise to remove it, then insert the new bulb and twist it clockwise to secure it in place.


How do you turn on wipers on Mercedes 190E?

To turn on the wipers, you twist the indicator knobat the tip in a forwards fashion. To switch them off, you do the reverse and twist the tip backwards towards you. To turn on the wipers, you twist the indicator knobat the tip in a forwards fashion. To switch them off, you do the reverse and twist the tip backwards towards you.


How do you turn a heater on?

twist the knob or push the buttonor flip the switch