Don't put your Revere Ware in the oven. While in many cases oven baking may be fine, there is a temperature above which the Bakelite handles will start to melt and emit a strong chemical odor. Various Revere Ware guides claims this temperature is 425 degrees F but people have reported this at lower temperatures and if the Bakelite is too close to the broiler, it will be at a much higher temperature than the rest of the oven.
A Revere Ware Proline skillet with a metal handle (no bakelite) should be safe in the oven at normal baking temperatures, although we haven't ever done so. One of ours may be only useful for that since it has recently developed a bubble on the bottom that won't let it sit properly on our flat top ceramic stove.
Of course you can, I use all my wolfgang stainless in the owen all the time, sometimes at 425 degrees, no problem ever.....
I think up to 350 degrees
YES.
While Revere was a silversmith, he didn't make Revere Ware.
Yes, Revere Ware generally is. They make different styles and types now, but the 'classic' Revere Ware is Stainless Steel with Copper Clad bottoms.
You are in luck! You can now get screws as well as other Revere Ware parts from http://www.reverewareparts.com.
Here is the Web page that describes Revere Ware's warranties: http://revereware.com/index.asp?pageId=17
Most of the new Rever Ware pots that are sold today are made in China. The old ones are difficult to find, but you can try to get used Revere Ware on eBay.
Goku
Replacement screws and nuts for vintage Revere Ware pans are not available anymore from the Revere Company but you can buy them now from a new supplier at http://www.reverewareparts.com, that's revere ware parts dot com. Simple.
no
wher can you buy your prodct
Goku
Corningware is specifically made to be able to go into the microwave and oven, so yes, you can as long as you are using the glass lid that came with the dish.
----- I would recommend trying eBay, though do your research to see if it is actually vintage, or a newer one. ----- You can identify the vintage of your pan at this very helpful Revere Info Center: http://mysite.verizon.net/vzeoywo4/theshineshop2/id1.html If your cookware turns out to be from the vintage Revere Ware era (1939-1968) you can find replacement handles at www.reverewareparts.com.